Overview
HSM3WIFI is a temporary USB Wi-Fi programming accessory for PowerSeries Pro control panels.
Official source
- Product page: DSC HSM3WIFI (ID 2656)
Supported host panels
- HS3032
- HS3128
- HS3248
Deployment intent
Use for temporary commissioning/programming sessions only — connect USB, configure the panel over Wi-Fi from a mobile device or PC, then remove before leaving site.
Product status
DSC has published a discontinuation notice for HSM3WIFI — verify replacement programming options (hardwired IP, dealer tools) for new Pro installs.
At a glance
| Detail | Value |
|---|---|
| Connection | USB to Pro panel rear port |
| Panel trouble while connected | USB Wi-Fi Connected (expected) |
| Permanent install | Not supported — remove at handoff |
| Discontinued | Verify alternate programming path for new installs |
Compatible Peripherals
Supported host panels only
| Panel | USB port | Notes |
|---|---|---|
| HS3032 | Rear USB | Temporary programming only |
| HS3128 | Rear USB | Temporary programming only |
| HS3248 | Rear USB | Temporary programming only |
Works with (software path)
- Installer mobile/PC app over panel Wi-Fi AP while adapter inserted
- Does not replace HS65WPSNA primary power adapter
Not compatible
- PowerSeries PC1616/1832/1864 Keybus panels
- PowerSeries Neo HS2016–HS2128 (no HSM3WIFI USB port)
- MAXSYS PC4020 Combus panels
- Permanent installation — remove before handoff