Qolsys IQ Pro: Installation Notes

Q: Which Qolsys IQ panel do I have?

Check label and installer paperwork — **IQ Panel 4, IQ Panel 5, IQ Pro, and IQ Hub use different modules, firmware, and screen layouts. IQ Panel 4/5 support PowerG; legacy sensors need matching IQ Card sensors.

Q: Why does my panel show cell failure?

Usually inactive SIM, wrong module SKU, weak RSSI, or antenna fault — run installer cell test and verify Alarm.com/dealer activation.

Q: Can I add sensors myself?

Wireless enrollment requires installer code on the panel for new zones — end users typically cannot add sensors without installer access.

Q: Standard vs encrypted sensors?

PowerG S-Line sensors require IQ Panel or IQ Hub hosts. Legacy 319/345 MHz sensors require the matching IQ Card installed.

Q: Where is official documentation?

Qolsys product pageIQ PRO Install Manual 29011132R007 WEBIQ Pro User ManualIQ Pro FlyerIQ Pro DNA Chart v8IQ Pro Flyer Spec New Primary reference: IQ Pro installation and programming guide

Q: How do I test after installation?

Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.

Q: Can I mix PowerG and 319/345 MHz legacy sensors?

PowerG needs IQ Panel/H hub; 319/345 needs IQ Card 319/345 installed transceiver hardware — they do not enroll on the standard 345 MHz receiver alone.

On this page

Overview
Installation Notes
FAQs

Overview

The Qolsys IQ Pro panel targets pro/commercial-grade installs with expanded I/O, PowerG, and Alarm.com integration compared to residential IQ4 SKUs.

The panel is the brain of the intrusion system: it supervises wired and wireless zones, drives bell/siren outputs, manages automation on supported models, and reports to Alarm.com when a compatible communicator is installed. Installers program zones, user codes, and dialer options with installer menu / pairing wizard (varies by IQ Panel 4, 5, Hub); end users arm/disarm from IQ Remote, keyfobs, or Alarm.com app.

At a Glance

Specification	Details
Role	Pro-grade IQ panel platform
Wireless	PowerG sensor ecosystem
Use	Larger installs needing pro panel features

What This Panel Does Well

Coordinates intrusion zones, automation, user codes, and central station reporting when cell and monitoring are configured.

Before You Service or Replace One

Exact panel model — IQ Panel 4 vs IQ5 vs IQ Pro vs IQ Hub — firmware and modules differ.
Encryption — PowerG vs legacy card vs hardwire module sensors in the field.
Cell module SKU — Built-in cellular vs Wi-Fi path per panel SKU and Alarm.com plan.
Installer code — required for zone changes; document before service.
Alarm.com dealer — account status, plan, and remote programming access.

Official Sources

Use official Qolsys install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.

Related troubleshooting guides

Qolsys IQ Panel alerts: low battery, tamper, supervision, and connectivity How to read and fix trouble alerts on Qolsys IQ Panel 2, IQ Panel 4, IQ Panel 5, and IQ Hub, plus PowerG vs S-Line sensors and default codes.
How to bypass a zone on your alarm system (Honeywell, DSC, 2GIG, Qolsys) Key sequences to bypass a door, window, or motion zone so you can arm with it open, what bypassing does and does not do, and how to undo it.
Installer code vs master code: default codes by brand The difference between an alarm installer code, master code, and user codes, the factory default installer codes for common panels, and what to do if yours was changed.
Alarm communication failure (FC, Comm Fail, trouble 4): causes and fixes Why an alarm panel reports a communication failure, from cancelled landlines and VoIP to retired 3G cellular radios, and what to ask your monitoring company.
Alarm keeps going off for no reason? Common causes of false alarms The real reasons alarms go off on their own: misaligned door contacts, motion detectors and pets, heat and drafts, low batteries, and entry delays, and how to track down the zone responsible.

Installation Notes

Follow IQ Pro installation and programming guide and the official resource links in this product folder for mounting, wiring, and enrollment.

Pre-install checklist

Confirm panel model (IQ Panel 4/5/Pro/Hub) and encryption requirements.
Verify dealer cell account and module SKU before cell install.
Document installer code and existing zone map for takeover jobs.
Plan antenna routing (ANT5XL) when panel location has poor cell RSSI.
Have listed batteries and tools for sensor mounts before enrollment.

Typical install sequence

Mount and power panel; apply firmware updates per dealer bulletin.
Install cell module and run communication test / Alarm.com activation.
Enroll wireless sensors via installer Learn mode; label zones.
Include Z-Wave devices after excluding from any prior hub.
Install IQ Card for legacy sensors or optimize PowerG placement before fringe wireless devices.
Run walk test, user code training, and central station test if monitored.

Power and connectivity reference

Product type	Power	Network / RF
IQ Panel 4/5/Pro/Hub panel	AC + backup battery	PowerG sensors; IQ Cards; Z-Wave automation
Wireless sensor	Battery per SKU	PowerG encrypted; IQ Card 319/345 legacy
Cell module	Panel-powered	LTE to dealer / Alarm.com
IQ Remote keypad	PowerG link	IQ Panel host
Z-Wave module	Mains or battery per device	Z-Wave to panel

Source: IQ Pro installation and programming guide (Qolsys official documentation).

Open the manufacturer manual

FAQs

Which Qolsys IQ panel do I have?

Check label and installer paperwork — **IQ Panel 4, IQ Panel 5, IQ Pro, and IQ Hub use different modules, firmware, and screen layouts. IQ Panel 4/5 support PowerG; legacy sensors need matching IQ Card sensors.

Why does my panel show cell failure?

Usually inactive SIM, wrong module SKU, weak RSSI, or antenna fault — run installer cell test and verify Alarm.com/dealer activation.

Can I add sensors myself?

Wireless enrollment requires installer code on the panel for new zones — end users typically cannot add sensors without installer access.

Standard vs encrypted sensors?

PowerG S-Line sensors require IQ Panel or IQ Hub hosts. Legacy 319/345 MHz sensors require the matching IQ Card installed.

Where is official documentation?

Primary reference: IQ Pro installation and programming guide

How do I test after installation?

Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.

Can I mix PowerG and 319/345 MHz legacy sensors?

PowerG needs IQ Panel/H hub; 319/345 needs IQ Card 319/345 installed transceiver hardware — they do not enroll on the standard 345 MHz receiver alone.