The DSC MAXSYS PC4020 is a commercial control platform with 16 on-board supervised zones, expandable to 128 zones through Combus modules, two addressable detection loops, and wireless receivers. It integrates burglary, access control, automation, and residential fire functions in one panel programmed primarily through DLS2002+ and LCD4500/LCD4501 keypads.
At a Glance
| Specification | PC4020 / MAXSYS |
|---|
| On-board hardwired zones | 16 supervised inputs |
| Maximum system zones | 128 (hardwired expanders + addressable + wireless) |
| Addressable loops | 2 on-board loops; up to 112 addressable devices |
| Wireless zones | Up to 64 (up to 8 PC4164 v2.x receivers) |
| Partitions | 8 independent partitions with separate account codes |
| User codes | 1,500 codes (4- or 6-digit); 64 access levels for access control |
| Keypads | Up to 16 LCD4501 (v2.0+) or LCD4500 (v2.02+) on Combus |
| Combus | 4-wire station wire; 500 mA; up to 4 legs × 1,000 ft (305 m) each |
| Auxiliary power | 12 VDC 500 mA continuous; switched AUX 300 mA (4-wire smokes) |
| PGM outputs | 2 programmable (50 mA each, or 170 mA each as addressable loops) |
| Bell output | Supervised; expandable via PC4702 modules (up to 8 supervised outputs) |
| Communicator | Integral supervised digital dialer; alt. comms (T-Link, ESCORT4580, etc.) |
| Low-power outputs | Up to 144 via PC4216 modules (v2.1+ for temporal fire) |
| Relay outputs | Up to 64 via PC4204 / PC4204CX (Combus repower capable) |
| Access control | Up to 32 card access-control modules (PC4850 family) |
| Programming | DLS2002 or higher; installer ref [*, 8] at keypad |
What the PC4020 Does Well
MAXSYS targets mid-market commercial and high-end residential: retailers, schools, industrial sites, and multi-partition buildings. Combus simplifies expansion without reworking the core panel. Addressable loops cut wire home runs for large floors. Integrated access control shares user codes and partitions with intrusion. T-Link TL-250/TL-300 IP reporting rides existing LAN infrastructure with AES encryption options.
Before You Service or Replace One
- Confirm PC4020 vs PC4020CF (commercial fire)—fire programming and loops differ.
- Inventory Combus module map (PC41xx, PC4216, PC4204, PC4820, PC4850, PC4702) before swapping the board.
- Run diagnostics ref
[04] to identify E (comms), T (tamper), or LV (low voltage) faults by module number. - MAXSYS is not PowerSeries Keybus—PK5500/RF5132 parts do not apply.
- Use Battery Standby Calculation Chart (DSC part 29003350) for listed standby times.
- Factory default
[0402] wipes all programming—only within first 10 minutes after power-up.
Official Sources
- Product page: DSC MAXSYS Control Panel (ID 4)
- PC4020 v3.5 Installation Manual, PC4020 User Manual v3.3, PC4020CF Commercial Fire Installation Manual — DSC official documentation