Overview
The PC5320 is a multiple wireless receiver module for classic PowerSeries — it expands 433 MHz wireless zone capacity. DSC catalog lists it under communicators, but it is not a central-station communicator.
Reporting path
PowerSeries wireless receiver module
At a Glance
| Detail | Value |
|---|
| Product type | Alarm communicator / reporting module |
|---|
| Model family (PC5320) | See label and install manual |
|---|
| Reporting path | PowerSeries wireless receiver module |
|---|
| Primary manual | PC5320 v1.0 Installation Manual |
|---|
| Region / listing notes | 433 MHz PowerSeries wireless only |
|---|
Before You Install or Replace One
- Confirm exact model number on the communicator label matches the install manual.
- Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, IMPASSA integrated, or universal dialer-capture are not interchangeable.
- Confirm monitoring receiver and account accept this communicator format (Contact ID, SIA, IP, cellular).
- Check carrier/network generation (3G sunset, LTE band, Ethernet path) for your region.
- Add communicator current draw to panel battery standby calculation where the module loads from panel bus power.
Official Sources
- Product page: DSC Multiple Wireless Receiver Module (ID 43)
- PC5320 v1.0 Installation Manual — DSC official documentation
Troubleshooting
PC5320 service
- Do not confuse with cellular communicators — PC5320 does not report to central station by itself.
- Pair with compatible PowerSeries wireless ecosystem per PC5320 install manual.
For panel reporting faults (FTC, alt-comms), troubleshoot the host communicator module paired with this product — not this accessory alone.
Source: PC5320 v1.0 Installation Manual.