DSC Multiple Wireless Receiver Module Compatible Panels & Accessories

The PC5320 is a multiple wireless receiver module for classic PowerSeries — it expands 433 MHz wireless zone capacity. DSC catalog lists it under communicators, but it is not a central-station communicator. Reportin...

Overview

The PC5320 is a multiple wireless receiver module for classic PowerSeries — it expands 433 MHz wireless zone capacity. DSC catalog lists it under communicators, but it is not a central-station communicator.

Reporting path

PowerSeries wireless receiver module

At a Glance

DetailValue
Product typeAlarm communicator / reporting module
Model family (PC5320)See label and install manual
Reporting pathPowerSeries wireless receiver module
Primary manualPC5320 v1.0 Installation Manual
Region / listing notes433 MHz PowerSeries wireless only

Before You Install or Replace One

  • Confirm exact model number on the communicator label matches the install manual.
  • Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, IMPASSA integrated, or universal dialer-capture are not interchangeable.
  • Confirm monitoring receiver and account accept this communicator format (Contact ID, SIA, IP, cellular).
  • Check carrier/network generation (3G sunset, LTE band, Ethernet path) for your region.
  • Add communicator current draw to panel battery standby calculation where the module loads from panel bus power.

Official Sources

  • PC5320 v1.0 Installation Manual — DSC official documentation

Compatible Peripherals

This page lists which alarm panels and related equipment work with this communicator — not wireless sensors or keypads.

Host panels & systems

Host systemHow it connects
PowerSeries PC1616 / PC1832 / PC1864Keybus wireless receiver module (not alt-comms)

Related accessories

  • 433 MHz PowerSeries wireless devices (WS/RF series)

Not compatible

  • Neo PowerG receivers
  • Cellular/IP reporting (use separate alt-comms module)
  • MAXSYS PC4164 wireless receivers

Central station / receiver notes

Universal and T-Link products require a monitoring receiver that accepts the communicator's protocol and supervision. Confirm with your central station before install.

Source: PC5320 v1.0 Installation Manual (DSC official documentation).