Overview
The PC4664 is a MAXSYS graphic annunciator kit that displays zone status, troubles, device operation, and system events at a glance on a wall-mounted graphic layout. The PC4664 shows up to 64 events on a 11" × 17" (279 × 432 mm) display. It connects to PC4010/PC4020 MAXSYS panels over Combus and is programmed from an enrolled LCD keypad or DLS downloading software—same workflow as the rest of the MAXSYS system.
The companion PC4632 model offers 32 events on a smaller display; setup and programming are similar (see shared install manual).
At a Glance
| Specification | PC4664 |
|---|---|
| Display capacity | Up to 64 events |
| Display size | 11" × 17" (279 × 432 mm) |
| Host panel | PC4010 / PC4020 MAXSYS |
| Bus connection | Combus (4-wire) |
| Programming | LCD4500/LCD4501 keypad or DLS download |
| Output driver | Enrolled as PC4216 low-power output module |
| Indicators | Zone open/close, troubles, device operation, system status |
| Typical use | manufacturing plants, warehouses, large offices, and residential apartment buildings |
Before You Install One
Complete these PC4020 steps first:
- Plan and wire the PC4020 system (install manual).
- Install panel, power, and at least one LCD keypad for programming.
- Install and enroll zone expander modules (PC4108A, PC4116).
- Install and enroll detectors in final locations—makes annunciator layout planning accurate.
Then plan annunciator layout artwork (supplied templates or custom), Combus homerun, tamper, and LED matrix wiring.
Official Sources
- Product page: DSC MAXSYS 64 Point Graphic Annunciators (ID 34)
- PC4632/PC4664 Installation Manual v1.0 (English NA) — DSC official documentation
- MAXSYS engineer specification sheet — system context
Compatible Peripherals
Host Requirements
| Component | Requirement |
|---|---|
| Control panel | PC4010 or PC4020 MAXSYS |
| Keypad | At least one enrolled LCD4500/LCD4501 for programming |
| Bus | Combus 4-wire from PC4020 |
| Output module | PC4216 enrollment for LED driver (low-power outputs) |
| Optional | PC4204 for Combus repower on long legs |
Related MAXSYS Products
| Model | Display |
|---|---|
| PC4632 | 32 events; 8" × 11" display |
| PC4664 | 64 events; 11" × 17" display |
Only one annunciator layout per enrolled output channel—match PC4664 hardware to planned 64-event artwork.
Not Compatible
- PowerSeries or Neo panels/keypads
- PC4632/4664 on non-MAXSYS Combus implementations without PC4010/4020 host
Source: PC4632/PC4664 Installation Manual §1.1.