Overview
Ring Alarm Keypad — Z-Wave keypad for arming, disarming, and status at an entry point without opening the Ring app.
On Ring Alarm, this device is a supervised Z-Wave peripheral — status appears under Device Health in the Ring app, and faults can block arming depending on mode settings.
At a Glance
| Specification | Details |
|---|---|
| Function | Arm/disarm, status LED, panic (model-dependent) |
| Wireless | Z-Wave to Base Station |
| Power | AC adapter and/or battery backup per generation |
| Codes | Shared user access via Ring app — not standalone user tables |
| Mounting | Wall mount at entry; within Z-Wave range |
What This Device Does Well
Provides reliable status reporting and user-facing alerts through the Ring app when installed and enrolled correctly.
Before You Service or Replace One
- Generation — Gen 1 vs Gen 2 vs 3rd gen — battery type and reset steps differ.
- Hub online — Base Station must show connected in app before diagnosing sensor.
- Range — distant devices may need Range Extender, not a new sensor.
- Tamper — cover fully closed before declaring hardware fault.
- Monitoring mode — Practice/disarmed modes affect whether alarms dispatch.
Official Sources
- https://ring.com/support/articles/6uisx/Troubleshooting-your-Ring-Alarm-Keypad-Gen-2
- https://ring.com/support/articles/dj2cy/Troubleshooting-Your-Ring-Alarm-Keypad-1st-Gen
- https://ring.com/support/articles/izp62/Understanding-Ring-Alarm-Keypad-2nd-Generation-Lights-and-Buttons
- https://ring.com/support/articles/pd24k/Replacing-your-Ring-Alarm-Keypad-1st-Generation
- https://ring.com/support/articles/vgw53/Installing-and-using-Ring-Alarm-Keypad
- https://ring.com/support/articles/yt6wb/Ring-Alarm-Keypad-1st-Gen-Lights-and-Buttons-Explained
- https://ring.com/support/articles/mkd8i/Safety-and-Compliance-Information-for-Alarm-Keypad-2nd-Gen
- https://ring.com/support/articles/kdrz7/Keypad-and-Base-Station-LED-Patterns-Explained
- https://ring.com/support/products/alarm/keypad-gen-1?page=1
- https://ring.com/support/products/alarm/keypad-gen-2?page=1
Use official Ring support articles for reset procedures, battery types, LED patterns, and regional availability — Ring updates app flows frequently.
Compatible Peripherals
This page lists what this product works with in the Ring ecosystem — not generic third-party alarm panels unless explicitly stated in Ring support.
Host compatibility
| Host / ecosystem | How it connects |
|---|---|
| Ring Alarm Base Station | Z-Wave keypad |
| Ring Alarm Pro Base Station | Z-Wave keypad |
Not compatible / common mistakes
Using Ring Alarm Z-Wave devices without a Ring Alarm Base Station or Alarm Pro hub.
Replacement guidance
- Match generation and SKU on the product label before ordering.
- After replacement, remove old device from app and add new hardware — Z-Wave IDs do not transfer.
- Document device name and placement in app for end-user support.
- For monitored accounts, run test mode per Ring Protect instructions after swap.
Source: Ring Alarm Keypad setup guide (Ring official documentation).