Interlogix Forcefield Software – Video Switcher License Compatible Systems & Integrations

4G/LTE communication module — cellular reporting for Challenger/Tecom/Reliance systems (UltraSync-enabled SKUs in AU/NZ). Without reliable cellular reporting, remote arm/disarm and central station signals stop when ...

Overview

4G/LTE communication module — cellular reporting for Challenger/Tecom/Reliance systems (UltraSync-enabled SKUs in AU/NZ).

Without reliable cellular reporting, remote arm/disarm and central station signals stop when phone lines or broadband fail. Match the exact module SKU to your panel model and dealer platform before truck roll.

At a Glance

SpecificationDetails
RoleCellular alarm reporting path
SIMSingle or dual SIM — region specific SKUs
ActivationDealer/UltraSync provisioning required

What This Device Does Well

Provides reliable supervised status at the panel and Alarm.com / UltraSync when installed, enrolled, and range-tested correctly.

Before You Service or Replace One

  • ICCID and carrier — verify active SIM on correct network.
  • Module-to-panel pairing — Simon vs Challenger vs Reliance vs Tecom slot compatibility.
  • Antenna path — internal vs ANT5XL external routing.
  • Dealer platform — Alarm.com / UltraSync activation tied to specific module SKU.

Official Sources

Use official Aritech install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.

Compatible Peripherals

This page lists Interlogix / Aritech ecosystem compatibility — panels, transceivers, repeaters, and monitoring platforms — not third-party panel brands unless using an approved takeover path.

Host compatibility

Host / ecosystemHow it connects
Challenger / Tecom panelsModule slot per install guide
Simon LTE modulesAlarm.com path on Simon panels

Not compatible / common mistakes

Using Interlogix devices without a compatible panel receiver, DGP, or wireless expander for your product family.

Replacement guidance

  • Match SKU and encryption generation on product label before ordering.
  • Delete old zone/device in installer programming before enrolling replacement.
  • Document zone number and name for user and central station records.
  • Run walk test and communication test after swap on monitored accounts.

Source: 4G communication module install guide (Aritech official documentation).