DSC PowerSeries Pro Hardwired Touchscreen Keypad 7 inch with Prox Support in Black or White FAQs

HS2TCHPRO 7-inch touchscreen keypad with prox support is the Pro equivalent of Neo HS2TCHP — graphical arming and status on PowerSeries Pro Corbus. Panel bus / link type Corbus (PowerSeries Pro) At a Glance DetailVa...

Overview

HS2TCHPRO 7-inch touchscreen keypad with prox support is the Pro equivalent of Neo HS2TCHP — graphical arming and status on PowerSeries Pro Corbus.

Panel bus / link type

Corbus (PowerSeries Pro)

At a Glance

DetailValue
Product typeAlarm keypad / operator interface
Model family (HS2TCHPRO)See label and install manual
Bus / wireless linkCorbus (PowerSeries Pro)
Primary manualPowerSeries Pro HS2TCHPRO Installation Manual; User Guide
Region / listing notesBlack/white bezel SKUs — same electronics

Before You Install or Replace One

  • Confirm exact model number on the keypad label matches the install manual.
  • Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, and IMPASSA wireless are not interchangeable.
  • Plan unique keypad address or wireless enrollment — duplicates cause bus collisions or offline devices.
  • Check partition assignment (global vs partition keypad) for multi-partition sites.
  • Include keypad current draw in panel AUX / Corbus / battery standby calculations.

Official Sources

FAQs

Which panels does this keypad work with?

See compatible-peripherals.md for the host panel table. Keypads are family-specific — PK5500 does not work on Neo Corbus, and WT5500 is IMPASSA-only.

Why is the keypad blank but the panel has power?

Usually bus wiring, wrong address, or AUX/Corbus undervoltage. Wireless keypads: check battery and enrollment.

Can I use this keypad for programming?

Full-message and touchscreen models typically support **[*, 8, installer code]** where the host panel allows. Fixed LED keypads have limited programming menus.

Can I move this keypad to another panel brand?

Only within the same DSC bus family after full re-address and reprogramming. Never move Keybus keypads to Neo Corbus without replacing the keypad model.

Where is the official documentation?

DSC PowerSeries Pro Hardwired Touchscreen Keypad 7 inch with Prox Support in Black or White (ID 2678)PowerSeries Pro HS2TCHPRO Installation Manual; User Guide

Which panels does this keypad work with?
See compatible-peripherals.md for the host panel table. Keypads are family-specific — PK5500 does not work on Neo Corbus, and WT5500 is IMPASSA-only.
Why is the keypad blank but the panel has power?
Usually bus wiring, wrong address, or AUX/Corbus undervoltage. Wireless keypads: check battery and enrollment.
Can I use this keypad for programming?
Full-message and touchscreen models typically support [*, 8, installer code] where the host panel allows. Fixed LED keypads have limited programming menus.
Can I move this keypad to another panel brand?
Only within the same DSC bus family after full re-address and reprogramming. Never move Keybus keypads to Neo Corbus without replacing the keypad model.
Where is the official documentation?
DSC PowerSeries Pro Hardwired Touchscreen Keypad 7 inch with Prox Support in Black or White (ID 2678) (https://www.dsc.com/index.php?n=products&o=view&id=2678) — PowerSeries Pro HS2TCHPRO Installation Manual; User Guide