Overview
This catalog entry is a PowerSeries Neo control panel (Alarm.com bundle listing), not a communicator module. Communicators compatible with these panels are listed separately (TL280, TL880, 3G8080, etc.).
Reporting path
Control panel (miscategorized)
At a Glance
| Detail | Value |
|---|
| Product type | Alarm communicator / reporting module |
|---|
| Model family (HS2016, HS2032, HS2064, HS2128) | See label and install manual |
|---|
| Reporting path | Control panel (miscategorized) |
|---|
| Primary manual | HS2016–HS2128 Installation Guide v1.35 |
|---|
| Region / listing notes | See Neo control panel listings in control-panels category |
|---|
Before You Install or Replace One
- Confirm exact model number on the communicator label matches the install manual.
- Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, IMPASSA integrated, or universal dialer-capture are not interchangeable.
- Confirm monitoring receiver and account accept this communicator format (Contact ID, SIA, IP, cellular).
- Check carrier/network generation (3G sunset, LTE band, Ethernet path) for your region.
- Add communicator current draw to panel battery standby calculation where the module loads from panel bus power.
Official Sources
- Product page: DSC PowerSeries Neo Control Panels (ID 2574)
- HS2016–HS2128 Installation Guide v1.35 — DSC official documentation
Error Codes
Neo control panel listing (not a communicator)
This catalog entry is a control panel, not a standalone communicator. Reporting requires a separate Neo alt-comms module (TL280, TL880, etc.).
| Site symptom | Actual fix |
|---|---|
| FTC / communicator trouble | Identify installed TL280/TL880/SEM on Corbus |
| "Communicator won't enroll" | Enroll alt-comms at [902] — panel board is not the dialer |
| Wrong product ordered | Order TL280LER3/TL880LEFR per Neo compatibility matrix |
Panel FTC and alt-comms troubles apply to the host communicator, not this accessory — see the communicator listing for full trouble tables.
Source: HS2016–HS2128 Installation Guide v1.35 (DSC official documentation).
| Code | Meaning | Suggested Fix |
|---|---|---|
| Site symptom | Actual fix | |
| FTC / communicator trouble | Identify installed TL280/TL880/SEM on Corbus | |
| "Communicator won't enroll" | Enroll alt-comms at `[902]` — panel board is not the dialer | |
| Wrong product ordered | Order TL280LER3/TL880LEFR per Neo compatibility matrix |