Overview
IQ Pro and IQ Pro P are hybrid security platforms with partitioned operation, PowerG wireless support, and multiple user interface paths.
Official source
- Product page: DSC IQ Pro / IQ Pro P (ID 2714)
- Manual basis: current IQ Pro User Manual reference and IQ Pro User Guide revision used by your deployment
Platform characteristics
- Supports HS2LCD keypad interfaces
- Supports PowerG PG wireless devices
- Supports IQ Remote user interfaces
- Supports partition-based operation for multi-area sites
Service perspective
Plan keypad and IQ Remote layout per partition so operators always have local status and arming control in assigned areas.
Installation Notes
Suggested commissioning sequence
- Mount panel and establish baseline power — verify AC and battery charge.
- Add HS2LCD keypads on Corbus; assign unique addresses; confirm
[*, 2]trouble scroll. - Enroll PowerG transceiver keypads (HS2LCDRF/WF) before remote PG sensors.
- Enroll PowerG PG sensors and sirens; run placement test at final mount locations.
- Add IQ Remote devices; map each to correct partition; test arming scope.
- Program partitions, user codes, and reporting path in DLS/dealer software.
- Complete walk test, bell/siren test, and central-station communication test.
Corbus wiring reminders
- Homerun +/-, Y, G — no T-taps on Corbus branches.
- Reserve AUX budget for all HS2LCD and expansion modules before power-up.
- UL fire listed installs: use HS2LCD (non-P variant) where manual requires.
Operational check before handoff
- Trouble-free on HS2LCD and IQ Remote for assigned partitions
- Arming/disarming verified per partition and user code
- End-user shown
[*][2]trouble path on primary keypad