DSC DSC PK5500 FAQs

PK5500 full-message LCD and RFK5500/RFK5564/RFK5516 variants add 64-zone status, programming access, and optional 433 MHz wireless receiver on Keybus PowerSeries panels. Panel bus / link type Keybus (PowerSeries) At a...

Overview

PK5500 full-message LCD and RFK5500/RFK5564/RFK5516 variants add 64-zone status, programming access, and optional 433 MHz wireless receiver on Keybus PowerSeries panels.

Panel bus / link type

Keybus (PowerSeries)

At a Glance

DetailValue
Product typeAlarm keypad / operator interface
Model family (PK5500, RFK5500, RFK5564, RFK5516)See label and install manual
Bus / wireless linkKeybus (PowerSeries)
Primary manualPK5500 Installation Manual v1.3; RFK5516 Installation Manual
Region / listing notes433 MHz RF variants — confirm regional frequency on label

Before You Install or Replace One

  • Confirm exact model number on the keypad label matches the install manual.
  • Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, and IMPASSA wireless are not interchangeable.
  • Plan unique keypad address or wireless enrollment — duplicates cause bus collisions or offline devices.
  • Check partition assignment (global vs partition keypad) for multi-partition sites.
  • Include keypad current draw in panel AUX / Corbus / battery standby calculations.

Official Sources

  • Product page: DSC PK5500
  • PK5500 Installation Manual v1.3; RFK5516 Installation Manual — DSC official documentation

FAQs

Which panels does this keypad work with?

See compatible-peripherals.md for the host panel table. Keypads are family-specific — PK5500 does not work on Neo Corbus, and WT5500 is IMPASSA-only.

Why is the keypad blank but the panel has power?

Usually bus wiring, wrong address, or AUX/Corbus undervoltage. Wireless keypads: check battery and enrollment.

Can I use this keypad for programming?

Full-message and touchscreen models typically support **[*, 8, installer code]** where the host panel allows. Fixed LED keypads have limited programming menus.

Can I move this keypad to another panel brand?

Only within the same DSC bus family after full re-address and reprogramming. Never move Keybus keypads to Neo Corbus without replacing the keypad model.

Where is the official documentation?

DSC PK5500 — PK5500 Installation Manual v1.3; RFK5516 Installation Manual

Which panels does this keypad work with?
See compatible-peripherals.md for the host panel table. Keypads are family-specific — PK5500 does not work on Neo Corbus, and WT5500 is IMPASSA-only.
Why is the keypad blank but the panel has power?
Usually bus wiring, wrong address, or AUX/Corbus undervoltage. Wireless keypads: check battery and enrollment.
Can I use this keypad for programming?
Full-message and touchscreen models typically support [*, 8, installer code] where the host panel allows. Fixed LED keypads have limited programming menus.
Can I move this keypad to another panel brand?
Only within the same DSC bus family after full re-address and reprogramming. Never move Keybus keypads to Neo Corbus without replacing the keypad model.
Where is the official documentation?
DSC PK5500 — PK5500 Installation Manual v1.3; RFK5516 Installation Manual