Overview
ADT Command is ADT's touchscreen security and automation panel — wireless SiX sensors, Z-Wave home automation, Wi-Fi/cellular paths to Alarm.com, and the ADT Control mobile app for arming, video, and smart-home rules.
The panel or hub is the center of your ADT system: arming state, wireless sensor supervision, local siren, and communication to ADT for app notifications and professional monitoring all flow through it. Cameras and doorbells appear in the ADT+ or ADT Control app but intrusion sensors require a compatible Command panel or Self-Setup hub.
Self-Setup / Blue by ADT systems are app-first (ADT+). ADT Command panels also use the ADT Control app but may require installer/dealer programming for zones, dialer, and advanced options.
At a Glance
| Specification | Details |
|---|---|
| Role | All-in-one alarm panel + automation hub |
| Wireless | SiX encrypted 2-way sensors (Command generation) |
| Legacy RF | Hybrid Command panels may support additional RF paths — verify SKU |
| Automation | Z-Wave devices when enabled on account |
| Monitoring | ADT professional monitoring + Alarm.com interactive |
| Power | AC with internal backup battery |
| App | ADT Control app (Command systems) |
What This Hub Does Well
See summary above — the panel/hub coordinates arming, wireless supervision, local siren, and cloud connectivity for the entire ADT location.
Before You Service or Replace One
- Exact platform — ADT Command (SiX) vs Self-Setup hub (ADT+) — sensors are not interchangeable without verification.
- Location in app — devices belong to an ADT account/location; swapping hubs may require re-enrollment.
- Monitoring account — ADT professional monitoring status, permits, and emergency contacts.
- Network — Wi-Fi credentials, cellular module (CellBridge), and ISP outage history.
- Accessory mix — confirm Command vs Self-Setup compatibility in help.adt.com before ordering replacements.
Official Sources
- ADT product page
- https://help.adt.com/article/ADT-Command-2x16-AIO-Quick-Guide
- https://help.adt.com/article/ADT-Command-7-Touchscreen-Quick-Guide
- https://help.adt.com/article/ADT-Command-Door-Window-Sensor-SIXMINICT3A
- https://help.adt.com/article/ADT-Command-Honeywell-SiXSIREN-ODA-Alarm
- https://help.adt.com/article/ADT-Command-Hybrid-Quick-Guide
- https://help.adt.com/article/ADT-Command-and-Control
- https://help.adt.com/article/ADT-Pulse-Skill-and-Amazon-Alexa-Commands-FAQs
- https://help.adt.com/article/Account-and-Billing-command-ssl
- https://www.adt.com/content/dam/adt/downloads/manuals/manual_Commander_2000.pdf
Use official ADT help.adt.com support articles for reset procedures, battery types, LED patterns, and regional availability — ADT updates app flows frequently.
Compatible Peripherals
This page lists what this product works with in the ADT ecosystem — not generic third-party alarm panels unless explicitly stated in ADT help.adt.com support.
Host compatibility
| Host / ecosystem | How it connects |
|---|---|
| SiX door/window, motion, glass sensors | Native Command enrollment |
| SiX sirens and keypads | Wireless peripherals on Command panel |
| Z-Wave locks, lights, thermostats | Automation inclusion per plan |
| Alarm.com | App, video, automation, dealer programming |
Not compatible / common mistakes
- Assuming Self-Setup / Blue by ADT battery sensors enroll on Command SiX without verification
- Mixing Pulse-era peripherals with Command without cross-reference
- Third-party Z-Wave devices not supported on your ADT account
Replacement guidance
- Match generation and SKU on the product label before ordering.
- After replacement, remove old device from app and add new hardware — Z-Wave IDs do not transfer.
- Document device name and placement in app for end-user support.
- For monitored accounts, run test mode per ADT monitoring plan instructions after swap.
Source: ADT Command quick guides and help.adt.com Command articles (ADT official documentation).