Overview
The 2GIG Edge is a modern smart home security panel combining intrusion detection, Z-Wave automation, built-in LTE connectivity options, and Alarm.com ecosystem features in a streamlined touchscreen platform.
The panel is the brain of the 2GIG system: it supervises wireless zones, drives local sirens, manages Z-Wave automation, and reports to Alarm.com (or your dealer monitoring platform) when a compatible cell module is installed and activated. Installers program zones, user codes, and dialer options in the installer menu; end users arm/disarm from the touchscreen, keyfobs, or Alarm.com app.
At a Glance
| Specification | Details |
|---|---|
| Role | Current-generation 2GIG smart home panel |
| Wireless sensors | 345 MHz and eSeries encrypted families |
| Automation | Z-Wave Plus smart home control |
| Cellular | Integrated / modular LTE paths per SKU |
| Programming | Installer and user menus; Alarm.com remote management |
| Accessories | Edge desktop stand, power supplies, ANT5XL attic antennas |
What This Panel Does Well
Coordinates intrusion zones, automation, user codes, and central station reporting when cell and monitoring are configured.
Before You Service or Replace One
- Exact panel model — GC2 vs GC3 vs Edge — firmware and modules differ.
- Encryption — GC2e/GC3e/Edge vs standard sensors in the field.
- Cell module SKU — Alarm.com vs ADC vs SecureNet vs Telus.
- Installer code — required for zone changes; document before service.
- Alarm.com dealer — account status, plan, and remote programming access.
Official Sources
Use official 2GIG PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Installation Notes
Follow 2GIG Edge Smart Home Manual and User Guide and the official resource links in this product folder for mounting, wiring, and enrollment.
Pre-install checklist
- Confirm panel model (GC2/GC3/Edge) and encryption requirements.
- Verify dealer cell account and module SKU before cell install.
- Document installer code and existing zone map for takeover jobs.
- Plan antenna routing (ANT5XL) when panel location has poor cell RSSI.
- Have listed batteries and tools for sensor mounts before enrollment.
Typical install sequence
- Mount and power panel; apply firmware updates per dealer bulletin.
- Install cell module and run communication test / Alarm.com activation.
- Enroll wireless sensors via installer Learn mode; label zones.
- Include Z-Wave devices after excluding from any prior hub.
- Install transceiver/repeater hardware before distant ePlus or fringe sensors.
- Run walk test, user code training, and central station test if monitored.
Edge placement
- Use Edge desktop stand or approved wall mount — airflow around power supply matters.
- Plan Z-Wave device locations relative to panel for automation enrollment.
- Activate Alarm.com services with dealer after LTE path is online.
Power and connectivity reference
| Product type | Power | Network / RF |
|---|---|---|
| GC2/GC3/Edge panel | AC + backup battery | 345 MHz receiver; Z-Wave; optional LTE |
| Wireless sensor | Battery per SKU | 345 MHz; ePlus 900 MHz with XCVR2 |
| Cell module | Panel-powered | LTE to dealer / Alarm.com |
| GC Touch keypad | AC + battery backup | Wireless to panel |
| Z-Wave module | Mains or battery per device | Z-Wave to panel |
Source: 2GIG Edge Smart Home Manual and User Guide (2GIG official documentation).