Overview
Ring motion detector — PIR-style motion sensor for interior rooms on Ring Alarm Z-Wave systems.
On Ring Alarm, this device is a supervised Z-Wave peripheral — status appears under Device Health in the Ring app, and faults can block arming depending on mode settings.
At a Glance
| Specification | Details |
|---|---|
| Detection | Passive infrared motion |
| Wireless | Z-Wave to Base Station / Range Extender |
| Power | Listed battery (varies by generation) |
| Pet notes | Verify pet-immunity / height guidance in official install article |
| Supervision | Ring app — Offline, Tampered, Low Battery |
What This Device Does Well
Provides reliable status reporting and user-facing alerts through the Ring app when installed and enrolled correctly.
Before You Service or Replace One
- Generation — Gen 1 vs Gen 2 vs 3rd gen — battery type and reset steps differ.
- Hub online — Base Station must show connected in app before diagnosing sensor.
- Range — distant devices may need Range Extender, not a new sensor.
- Tamper — cover fully closed before declaring hardware fault.
- Monitoring mode — Practice/disarmed modes affect whether alarms dispatch.
Official Sources
- https://ring.com/support/articles/3osk6/Setting-up-and-Using-Your-Ring-Alarm-Motion-Detector
- https://ring.com/support/articles/5xfg9/Troubleshooting-Ring-Alarm-Motion-Detector
- https://ring.com/support/articles/d0fh2/Troubleshooting-Ring-Alarm-Motion-Detectors-for-Astro
- https://ring.com/support/articles/h4oct/Resetting-Your-Ring-Alarm-Motion-Detector-1st-Gen-After-it-Triggers
- https://ring.com/support/articles/n58ds/Ring-Alarm-Motion-Detector-settings
- https://ring.com/support/articles/pyi9b/Safety-and-Compliance-Information-for-Alarm-Motion-Detector-2nd-Generation
- https://ring.com/support/articles/48kad/safety-and-compliance-information-for-ring-motion-detector
- https://ring.com/support/articles/88r6z/Getting-Started-Placing-Sensors-and-Motion-Detectors
- https://ring.com/support/articles/kh0py/Maximizing-Your-Smart-Lights-Motion-Detectors
- https://ring.com/support/articles/w4e6b/troubleshooting-and-light-patterns-for-ring-motion-detector
Use official Ring support articles for reset procedures, battery types, LED patterns, and regional availability — Ring updates app flows frequently.
Compatible Peripherals
This page lists what this product works with in the Ring ecosystem — not generic third-party alarm panels unless explicitly stated in Ring support.
Host compatibility
| Host / ecosystem | How it connects |
|---|---|
| Ring Alarm Base Station | Z-Wave motion zone |
| Ring Alarm Pro Base Station | Z-Wave motion zone |
Not compatible / common mistakes
Using Ring Alarm Z-Wave devices without a Ring Alarm Base Station or Alarm Pro hub.
Replacement guidance
- Match generation and SKU on the product label before ordering.
- After replacement, remove old device from app and add new hardware — Z-Wave IDs do not transfer.
- Document device name and placement in app for end-user support.
- For monitored accounts, run test mode per Ring Protect instructions after swap.
Source: Ring motion detector installation guide (Ring official documentation).