Overview
Qolsys IQ Power Switch-PG is listed here in the modules and accessories category. For details, start with the manufacturer's own information.
Official information
FAQs
Which Qolsys IQ panel do I have?
Check label and installer paperwork — **IQ Panel 4, IQ Panel 5, IQ Pro, and IQ Hub use different modules, firmware, and screen layouts. IQ Panel 4/5 support PowerG; legacy sensors need matching IQ Card sensors.
Why does my panel show cell failure?
Usually inactive SIM, wrong module SKU, weak RSSI, or antenna fault — run installer cell test and verify Alarm.com/dealer activation.
Can I add sensors myself?
Wireless enrollment requires installer code on the panel for new zones — end users typically cannot add sensors without installer access.
Standard vs encrypted sensors?
PowerG S-Line sensors require IQ Panel or IQ Hub hosts. Legacy 319/345 MHz sensors require the matching IQ Card installed.
Where is official documentation?
- Qolsys product page
- PowerG Everywhere Spec Sheet NA 2025
- D 308963 IQ Power Switch PG Installation Guide English
Primary reference: IQ Panel 4 installation manual and user guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix PowerG and 319/345 MHz legacy sensors?
PowerG needs IQ Panel/H hub; 319/345 needs IQ Card 319/345 installed transceiver hardware — they do not enroll on the standard 345 MHz receiver alone.