Overview
RAS arming station or alphanumeric keypad — Challenger/Tecom area arming station with LED or LCD status (CA111x, 4/8/16-area RAS).
On Interlogix systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.
At a Glance
| Specification | Details |
|---|---|
| Role | Partition arming and status keypad |
| Bus | Challenger/Tecom data bus |
| Variants | 2-line, 4-line, LCD with reader option |
What This Device Does Well
Provides reliable supervised status at the panel and Alarm.com / UltraSync when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- Sensor SKU — TX-E wireless vs hardwired loop vs 433 MHz expander path.
- Panel online — resolve panel AC/comms trouble before blaming sensor.
- Range — 433 MHz expander or move wireless receiver for distant zones.
- Battery type — use listed cell; replace all batteries in multi-cell devices.
- Tamper — cover fully closed before declaring hardware fault.
Official Sources
- Aritech product page
- TruVision_IP_Dome_cameras_June22WEB-1
- truvision_m_series_ip_camera_configuration_manual-1
- TruVision_m_series_varifocal_ip_dome_camera_installation_guide-1
- TruVision_M_Series_IP_Cameras_Brochure_Sept25
- 1151A-M-Series-IP-cameras-Release-Notes-EN
Use official Aritech install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.