Interlogix TecomC4 SWUP – Avigilon VMS Compatible Systems & Integrations

TecomC4 software license — integration driver for VMS, access, lifts, SNMP, or third-party systems (not field hardware).

On Interlogix systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.

At a Glance

What This Device Does Well

Provides reliable supervised status at the panel and Alarm.com / UltraSync when installed, enrolled, and range-tested correctly.

Before You Service or Replace One

• Sensor SKU — TX-E wireless vs hardwired loop vs 433 MHz expander path.
• Panel online — resolve panel AC/comms trouble before blaming sensor.
• Range — 433 MHz expander or move wireless receiver for distant zones.
• Battery type — use listed cell; replace all batteries in multi-cell devices.
• Tamper — cover fully closed before declaring hardware fault.

Official Sources

• Aritech product page
• TecomC4_DS
• TecomC4_Brochure_Sept25
• TecomC4_SUSPTC_2025

Use official Aritech install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.

This page lists Interlogix / Aritech ecosystem compatibility — panels, transceivers, repeaters, and monitoring platforms — not third-party panel brands unless using an approved takeover path.

Host compatibility

Not compatible / common mistakes

Using Interlogix devices without a compatible panel receiver, DGP, or wireless expander for your product family.

Replacement guidance

• Match SKU and encryption generation on product label before ordering.
• Delete old zone/device in installer programming before enrolling replacement.
• Document zone number and name for user and central station records.
• Run walk test and communication test after swap on monitored accounts.

Source: TecomC4 licensing documentation (Aritech official documentation).