Interlogix Axon Control Panel Compatible Systems & Integrations

Glass break or acoustic shock sensor — ShatterPro, Sentrol, or standalone shock sensors for glass protection. On Interlogix systems, wireless devices are supervised zones on the panel — tamper, low battery, and mi...

Overview

Glass break or acoustic shock sensor — ShatterPro, Sentrol, or standalone shock sensors for glass protection.

On Interlogix systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.

At a Glance

SpecificationDetails
DetectionGlass break acoustic or shock pattern
PlacementWithin rated distance to protected glass

What This Device Does Well

Provides reliable supervised status at the panel and Alarm.com / UltraSync when installed, enrolled, and range-tested correctly.

Before You Service or Replace One

  • Sensor SKUTX-E wireless vs hardwired loop vs 433 MHz expander path.
  • Panel online — resolve panel AC/comms trouble before blaming sensor.
  • Range433 MHz expander or move wireless receiver for distant zones.
  • Battery type — use listed cell; replace all batteries in multi-cell devices.
  • Tamper — cover fully closed before declaring hardware fault.

Official Sources

Use official Aritech install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.

Compatible Peripherals

This page lists Interlogix / Aritech ecosystem compatibility — panels, transceivers, repeaters, and monitoring platforms — not third-party panel brands unless using an approved takeover path.

Host compatibility

Host / ecosystemHow it connects
Compatible panel zonesWired or wireless per SKU

Not compatible / common mistakes

Using Interlogix devices without a compatible panel receiver, DGP, or wireless expander for your product family.

Replacement guidance

  • Match SKU and encryption generation on product label before ordering.
  • Delete old zone/device in installer programming before enrolling replacement.
  • Document zone number and name for user and central station records.
  • Run walk test and communication test after swap on monitored accounts.

Source: Glass break sensor install guide (Aritech official documentation).