Overview
ProSeries PROA7 / PROA7PLUS all-in-one touchscreen panels from Resideo supervise SiX two-way encrypted sensors, Z-Wave automation, Wi-Fi, and built-in LTE options for modern pro installs.
The panel is the brain of the Honeywell system: it supervises wired and wireless zones, drives bell/siren outputs, manages automation on supported models, and reports to Total Connect 2.0 via AlarmNet when a compatible communicator is installed. Installers program zones, user codes, and dialer options with the installer code (and Compass/downloader on VISTA); end users arm/disarm from keypads, keyfobs, or Total Connect 2.0.
At a Glance
| Specification | Details |
|---|---|
| Role | 7-inch all-in-one ProSeries hub |
| Wireless | SiX 2-way encrypted sensor family |
| Automation | Z-Wave Plus and Wi-Fi per SKU |
| Cellular | Integrated LTE on PLUS models |
| Zones | Large virtual zone capacity — verify programming guide |
| App | Total Connect 2.0 / Resideo Pro app workflows |
What This Panel Does Well
Coordinates intrusion zones, automation, user codes, and central station reporting when cell and monitoring are configured.
Before You Service or Replace One
- Exact panel model — VISTA vs Lynx vs ProSeries vs Lyric — firmware and modules differ.
- Encryption — SiX vs 5800 Series sensors in the field.
- Cell module SKU — Total Connect 2.0 vs ADC vs SecureNet vs Telus.
- Installer code — required for zone changes; document before service.
- Total Connect 2.0 dealer — account status, plan, and remote programming access.
Official Sources
- Resideo product page
- ProSeries End-User Brochure (English)
- ProSeries End-User Resideo Commercial Brochure (English)
- ProSeries End-User Resideo Commercial Sell Sheet (English)
- ProSeries End-User Sell Sheet (English)
- ProSeries SiX Sensors Family Data Sheet (English)
- ProSeries Touchscreen Touchpads Data Sheet (English)
- ProSeries At-A-Glance Brochure (English)
- ProSeries Residential Dealer Brochure (English)
- ProSeries Dealer Sell Sheet (English)
- ProSeries Dealer SMB Brochure (English)
- ProSeries Z-Wave Compatibility List (English)
Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Installation Notes
Follow PROA7/PROA7PLUS installation and setup guide and the official resource links in this product folder for mounting, wiring, and enrollment.
Pre-install checklist
- Confirm panel model (VISTA/Lynx/ProSeries/Lyric) and encryption requirements.
- Verify dealer cell account and module SKU before cell install.
- Document installer code and existing zone map for takeover jobs.
- Plan antenna routing (ANT5XL) when panel location has poor cell RSSI.
- Have listed batteries and tools for sensor mounts before enrollment.
Typical install sequence
- Mount and power panel; apply firmware updates per dealer bulletin.
- Install cell module and run communication test / Total Connect 2.0 activation.
- Enroll wireless sensors via installer Learn mode; label zones.
- Include Z-Wave devices after excluding from any prior hub.
- Install 5800RP repeater or optimize receiver placement before fringe 5800 sensors.
- Run walk test, user code training, and central station test if monitored.
ProSeries placement
- Use Edge desktop stand or approved wall mount — airflow around power supply matters.
- Plan Z-Wave device locations relative to panel for automation enrollment.
- Activate Total Connect 2.0 services with dealer after LTE path is online.
Power and connectivity reference
| Product type | Power | Network / RF |
|---|---|---|
| VISTA/Lynx/ProSeries/Lyric panel | AC + backup battery | 5800 receiver; ECP keypads; AlarmNet LTE/IP |
| Wireless sensor | Battery per SKU | 345 MHz 5800 Series; SiX on ProSeries/Lyric |
| Cell module | Panel-powered | LTE to dealer / Total Connect 2.0 |
| ECP keypad | Panel bus power | ECP to VISTA |
| Z-Wave module | Mains or battery per device | Z-Wave to panel |
Source: PROA7/PROA7PLUS installation and setup guide (Resideo official documentation).