Overview
SiX Series two-way encrypted sensor — ProSeries/Lyric wireless family with supervision, tamper, and encrypted RF (SiXCT, SiXPIR, SiXGB, SiXFOB, etc.).
On Honeywell systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.
At a Glance
| Specification | Details |
|---|---|
| Wireless | SiX 2-way encrypted to ProSeries/Lyric |
| Supervision | Enhanced status vs one-way 5800 |
| Power | Battery per SKU |
| Enrollment | Panel SiX learn mode |
What This Device Does Well
Provides reliable supervised status at the panel and Total Connect 2.0 when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- Sensor SKU — 5800 Series one-way vs SiX two-way encrypted vs hardwired.
- Panel online — resolve panel AC/cell trouble before blaming sensor.
- Range — 5800RP repeater or move 5881EN/6160RF receiver path for distant zones.
- Battery type — use listed cell; replace all batteries in multi-cell devices.
- Tamper — cover fully closed before declaring hardware fault.
Official Sources
- Resideo product page
- Installation and Setup Guide-PROSiXC2W - Hardwired to Wireless Converter Module (English)
- Quick Install Guide-PROSiXC2W - Convert to Wireless (English, French Canadian).pdf)
- ProSeries SiX Wireless Converter Data Sheet (English)
- Installation and Setup Guide-PROSiXC2W - Hardwired to Wireless Converter Module (French Canadian)
- Installation and Setup Guide-PROSiXC2W - Hardwired to Wireless Converter Module (Spanish)
- Installation and Setup Guide-PROSiXC2W - Hardwired to Wireless Converter Module (Portuguese)
- Quick Install Guide-PROSiXC2W - Convert to Wireless (Spanish, Portuguese).pdf)
- ProSeries At-A-Glance Brochure (English)
- ProSeries Residential Dealer Brochure (English)
- ProSeries Dealer Sell Sheet (English)
- ProSeries Dealer SMB Brochure (English)
Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Installation Notes
Follow SiX sensor installation guide and the official resource links in this product folder for mounting, wiring, and enrollment.
Pre-install checklist
- Confirm panel model (VISTA/Lynx/ProSeries/Lyric) and encryption requirements.
- Verify dealer cell account and module SKU before cell install.
- Document installer code and existing zone map for takeover jobs.
- Plan antenna routing (ANT5XL) when panel location has poor cell RSSI.
- Have listed batteries and tools for sensor mounts before enrollment.
Typical install sequence
- Mount and power panel; apply firmware updates per dealer bulletin.
- Install cell module and run communication test / Total Connect 2.0 activation.
- Enroll wireless sensors via installer Learn mode; label zones.
- Include Z-Wave devices after excluding from any prior hub.
- Install 5800RP repeater or optimize receiver placement before fringe 5800 sensors.
- Run walk test, user code training, and central station test if monitored.
Power and connectivity reference
| Product type | Power | Network / RF |
|---|---|---|
| VISTA/Lynx/ProSeries/Lyric panel | AC + backup battery | 5800 receiver; ECP keypads; AlarmNet LTE/IP |
| Wireless sensor | Battery per SKU | 345 MHz 5800 Series; SiX on ProSeries/Lyric |
| Cell module | Panel-powered | LTE to dealer / Total Connect 2.0 |
| ECP keypad | Panel bus power | ECP to VISTA |
| Z-Wave module | Mains or battery per device | Z-Wave to panel |
Source: SiX sensor installation guide (Resideo official documentation).