Overview
Lyric Controller (LCP500 series) is a touchscreen self-contained security and home automation hub using SiX and 5800 sensor paths (model/firmware dependent) with Lyric LTE communicators and Total Connect 2.0.
The panel is the brain of the Honeywell system: it supervises wired and wireless zones, drives bell/siren outputs, manages automation on supported models, and reports to Total Connect 2.0 via AlarmNet when a compatible communicator is installed. Installers program zones, user codes, and dialer options with the installer code (and Compass/downloader on VISTA); end users arm/disarm from keypads, keyfobs, or Total Connect 2.0.
At a Glance
| Specification | Details |
|---|---|
| Role | Lyric all-in-one controller |
| Wireless | SiX and/or 5800 paths per Lyric generation |
| Communicators | LyricLTE-A/C/V modules |
| Keypads | LKP500 wireless Lyric keypads |
| Automation | Home automation integrations per Lyric docs |
What This Panel Does Well
Coordinates intrusion zones, automation, user codes, and central station reporting when cell and monitoring are configured.
Before You Service or Replace One
- Exact panel model — VISTA vs Lynx vs ProSeries vs Lyric — firmware and modules differ.
- Encryption — SiX vs 5800 Series sensors in the field.
- Cell module SKU — Total Connect 2.0 vs ADC vs SecureNet vs Telus.
- Installer code — required for zone changes; document before service.
- Total Connect 2.0 dealer — account status, plan, and remote programming access.
Official Sources
- Resideo product page
- Cellular Antennas Data Sheet (English)
- LTE Family Data Sheet (English)
- LTE Communicator Compatibility Chart (English)
- Cellular Antennas Data Sheet (French)
- Cellular Antennas Data Sheet (Spanish)
- LTE Family Data Sheet (French)
- LTE Family Data Sheet (Spanish)
- LTE Communicator Compatibility Chart (Spanish)
- LTE Communicator Compatibility Chart (French)
- LTEM-PA and LTEM-PV Advanced Modular Communicator Sell Sheet (Spanish)
- Advanced Modular Communicator (Spanish)
Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
FAQs
Which Honeywell panel do I have?
Check label and installer paperwork — **VISTA, Lynx, ProSeries, and Lyric use different modules, firmware, and screen layouts. ProSeries/Lyric support SiX encrypted sensors sensors.
Why does my panel show cell failure?
Usually inactive SIM, wrong module SKU, weak RSSI, or antenna fault — run installer cell test and verify Total Connect 2.0/dealer activation.
Can I add sensors myself?
Wireless enrollment requires installer code on the panel for new zones — end users typically cannot add sensors without installer access.
Standard vs encrypted sensors?
SiX sensors require ProSeries or Lyric hosts. Mixing without support causes enrollment failure or encryption trouble.
Where is official documentation?
- Resideo product page
- Cellular Antennas Data Sheet (English)
- LTE Family Data Sheet (English)
- LTE Communicator Compatibility Chart (English)
- Cellular Antennas Data Sheet (French)
- Cellular Antennas Data Sheet (Spanish)
- LTE Family Data Sheet (French)
- LTE Family Data Sheet (Spanish)
- LTE Communicator Compatibility Chart (Spanish)
- LTE Communicator Compatibility Chart (French)
- LTEM-PA and LTEM-PV Advanced Modular Communicator Sell Sheet (Spanish)
- Advanced Modular Communicator (Spanish)
Primary reference: Lyric Controller install and setup guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix 5800 and SiX sensors?
SiX sensors require ProSeries or Lyric; 5800 needs a 5800 receiver transceiver hardware — they do not enroll on the standard 345 MHz receiver alone.
Which Honeywell panel do I have?
Check label and installer paperwork — **VISTA, Lynx, ProSeries, and Lyric use different modules, firmware, and screen layouts. ProSeries/Lyric support SiX encrypted sensors sensors.
Why does my panel show cell failure?
Usually inactive SIM, wrong module SKU, weak RSSI, or antenna fault — run installer cell test and verify Total Connect 2.0/dealer activation.
Can I add sensors myself?
Wireless enrollment requires installer code on the panel for new zones — end users typically cannot add sensors without installer access.
Standard vs encrypted sensors?
SiX sensors require ProSeries or Lyric hosts. Mixing without support causes enrollment failure or encryption trouble.
Where is official documentation?
- Resideo product page
- Cellular Antennas Data Sheet (English)
- LTE Family Data Sheet (English)
- LTE Communicator Compatibility Chart (English)
- Cellular Antennas Data Sheet (French)
- Cellular Antennas Data Sheet (Spanish)
- LTE Family Data Sheet (French)
- LTE Family Data Sheet (Spanish)
- LTE Communicator Compatibility Chart (Spanish)
- LTE Communicator Compatibility Chart (French)
- LTEM-PA and LTEM-PV Advanced Modular Communicator Sell Sheet (Spanish)
- Advanced Modular Communicator (Spanish)
Primary reference: Lyric Controller install and setup guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix 5800 and SiX sensors?
SiX sensors require ProSeries or Lyric; 5800 needs a 5800 receiver transceiver hardware — they do not enroll on the standard 345 MHz receiver alone.