Honeywell Home ISMV601 Indoor Video Live MotionViewer ISMV601 Compatible Systems & Integrations

5800 Series PIR — wireless motion detector (5800PIR, 5800PIR-COMBO, etc.) for interior intrusion detection on 345 MHz one-way mesh. On Honeywell systems, wireless devices are supervised zones on the panel — tamper...

Overview

5800 Series PIR — wireless motion detector (5800PIR, 5800PIR-COMBO, etc.) for interior intrusion detection on 345 MHz one-way mesh.

On Honeywell systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.

At a Glance

SpecificationDetails
DetectionPassive infrared motion
Wireless345 MHz 5800 Series
Pet immunityModel-specific — verify install guide
PowerListed lithium battery

What This Device Does Well

Provides reliable supervised status at the panel and Total Connect 2.0 when installed, enrolled, and range-tested correctly.

Before You Service or Replace One

  • Sensor SKU5800 Series one-way vs SiX two-way encrypted vs hardwired.
  • Panel online — resolve panel AC/cell trouble before blaming sensor.
  • Range5800RP repeater or move 5881EN/6160RF receiver path for distant zones.
  • Battery type — use listed cell; replace all batteries in multi-cell devices.
  • Tamper — cover fully closed before declaring hardware fault.

Official Sources

Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.

Compatible Peripherals

This page lists Honeywell Home ecosystem compatibility — panels, transceivers, repeaters, and monitoring platforms — not third-party panel brands unless using an approved takeover path.

Host compatibility

Host / ecosystemHow it connects
5800-compatible panels/receiversMotion zone enrollment

Not compatible / common mistakes

Using Honeywell wireless devices without a compatible 5800 receiver or SiX/ProSeries/Lyric host panel.

Replacement guidance

  • Match SKU and encryption generation on product label before ordering.
  • Delete old zone/device in installer programming before enrolling replacement.
  • Document zone number and name for user and central station records.
  • Run walk test and communication test after swap on monitored accounts.

Source: 5800 PIR installation guide (Resideo official documentation).