Honeywell Home HOME2PRO Rechargeable Compliance Fire Extinguisher 2-A:10-B:C (Red) Compatible Systems & Integrations

Miscellaneous Honeywell kit or catalog item — packaging, trim, or install kits supporting security hardware. On Honeywell systems, wireless devices are supervised zones on the panel — tamper, low battery, and miss...

Overview

Miscellaneous Honeywell kit or catalog item — packaging, trim, or install kits supporting security hardware.

On Honeywell systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.

At a Glance

SpecificationDetails
RoleInstall support or catalog item

What This Device Does Well

Provides reliable supervised status at the panel and Total Connect 2.0 when installed, enrolled, and range-tested correctly.

Before You Service or Replace One

  • Sensor SKU5800 Series one-way vs SiX two-way encrypted vs hardwired.
  • Panel online — resolve panel AC/cell trouble before blaming sensor.
  • Range5800RP repeater or move 5881EN/6160RF receiver path for distant zones.
  • Battery type — use listed cell; replace all batteries in multi-cell devices.
  • Tamper — cover fully closed before declaring hardware fault.

Official Sources

Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.

Compatible Peripherals

This page lists Honeywell Home ecosystem compatibility — panels, transceivers, repeaters, and monitoring platforms — not third-party panel brands unless using an approved takeover path.

Host compatibility

Host / ecosystemHow it connects
Honeywell systemsVerify SKU compatibility

Not compatible / common mistakes

Using Honeywell wireless devices without a compatible 5800 receiver or SiX/ProSeries/Lyric host panel.

Replacement guidance

  • Match SKU and encryption generation on product label before ordering.
  • Delete old zone/device in installer programming before enrolling replacement.
  • Document zone number and name for user and central station records.
  • Run walk test and communication test after swap on monitored accounts.

Source: Resideo product catalog (Resideo official documentation).