Overview
AlarmNet LTE communicator — cellular module for Total Connect 2.0 and central station reporting (LTE-X/C/V, LTEM-XT, LyricLTE, ProSeries LTE, etc.).
Without reliable cellular reporting, remote arm/disarm and central station signals stop when phone lines or broadband fail. Match the exact module SKU to your panel model and dealer platform before truck roll.
At a Glance
| Specification | Details |
|---|---|
| Role | Cellular AlarmNet path |
| Carriers | AT&T, Verizon, Bell — SKU specific |
| Platforms | Total Connect 2.0; central station via AlarmNet |
| Install | Panel-specific mounting and antenna routing |
What This Device Does Well
Provides reliable supervised status at the panel and Total Connect 2.0 when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- ICCID and carrier — verify active SIM on correct network.
- Module-to-panel pairing — VISTA vs Lynx vs ProSeries vs Lyric slot compatibility.
- Antenna path — internal vs ANT5XL external routing.
- Dealer platform — Total Connect 2.0 activation tied to specific module SKU.
Official Sources
- Resideo product page
- AlarmNet 8810iR Central Station Receiver Quick Installation Guide
- AlarmNet 8810iR Central Station Receiver Quick User Guide
Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
FAQs
Which AlarmNet module fits my panel?
LTE-X/C/V/A and LyricLTE modules are not interchangeable — match SKU to panel and dealer platform (Total Connect 2.0, ADC, SecureNet, Telus).
Do I need an external antenna?
If installer cell RSSI is below spec in the panel location, **panel-approved external antenna kits move the antenna to attic or exterior wall per guide.
Where is official documentation?
- Resideo product page
- AlarmNet 8810iR Central Station Receiver Quick Installation Guide
- AlarmNet 8810iR Central Station Receiver Quick User Guide
Primary reference: AlarmNet LTE install and activation guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix 5800 and SiX sensors?
SiX sensors require ProSeries or Lyric; 5800 needs a 5800 receiver transceiver hardware — they do not enroll on the standard 345 MHz receiver alone.
Which AlarmNet module fits my panel?
LTE-X/C/V/A and LyricLTE modules are not interchangeable — match SKU to panel and dealer platform (Total Connect 2.0, ADC, SecureNet, Telus).
Do I need an external antenna?
If installer cell RSSI is below spec in the panel location, **panel-approved external antenna kits move the antenna to attic or exterior wall per guide.
Where is official documentation?
- Resideo product page
- AlarmNet 8810iR Central Station Receiver Quick Installation Guide
- AlarmNet 8810iR Central Station Receiver Quick User Guide
Primary reference: AlarmNet LTE install and activation guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix 5800 and SiX sensors?
SiX sensors require ProSeries or Lyric; 5800 needs a 5800 receiver transceiver hardware — they do not enroll on the standard 345 MHz receiver alone.