Overview
AlarmNet IP communicator — broadband reporting path (7847i, 7846i, dual-path setups) for Total Connect 2.0 and central station.
Without reliable cellular reporting, remote arm/disarm and central station signals stop when phone lines or broadband fail. Match the exact module SKU to your panel model and dealer platform before truck roll.
At a Glance
| Specification | Details |
|---|---|
| Role | IP/Internet AlarmNet communicator |
| Path | Ethernet or panel connection per SKU |
| Dual path | Often paired with LTE for backup |
What This Device Does Well
Provides reliable supervised status at the panel and Total Connect 2.0 when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- ICCID and carrier — verify active SIM on correct network.
- Module-to-panel pairing — VISTA vs Lynx vs ProSeries vs Lyric slot compatibility.
- Antenna path — internal vs ANT5XL external routing.
- Dealer platform — Total Connect 2.0 activation tied to specific module SKU.
Official Sources
- Resideo product page
- LTE Family Data Sheet (English)
- ProSeries SiX Wireless Converter Data Sheet (English)
- LTE Communicator Compatibility Chart (English)
- Total Connect Compatibility Chart (English)
- 7847i-Data-Sheet
- 7847i-E-Data-Sheet
- 7847i-E-Data-Sheet-French
- LTE Communicator Compatibility Chart (Spanish)
- LTE Communicator Compatibility Chart (French)
- Total Connect Compatibility Chart (French)
Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Installation Notes
Follow 7847i / AlarmNet IP install guide and the official resource links in this product folder for mounting, wiring, and enrollment.
Pre-install checklist
- Confirm panel model (VISTA/Lynx/ProSeries/Lyric) and encryption requirements.
- Verify dealer cell account and module SKU before cell install.
- Document installer code and existing zone map for takeover jobs.
- Plan antenna routing (ANT5XL) when panel location has poor cell RSSI.
- Have listed batteries and tools for sensor mounts before enrollment.
Typical install sequence
- Mount and power panel; apply firmware updates per dealer bulletin.
- Install cell module and run communication test / Total Connect 2.0 activation.
- Enroll wireless sensors via installer Learn mode; label zones.
- Include Z-Wave devices after excluding from any prior hub.
- Install 5800RP repeater or optimize receiver placement before fringe 5800 sensors.
- Run walk test, user code training, and central station test if monitored.
Power and connectivity reference
| Product type | Power | Network / RF |
|---|---|---|
| VISTA/Lynx/ProSeries/Lyric panel | AC + backup battery | 5800 receiver; ECP keypads; AlarmNet LTE/IP |
| Wireless sensor | Battery per SKU | 345 MHz 5800 Series; SiX on ProSeries/Lyric |
| Cell module | Panel-powered | LTE to dealer / Total Connect 2.0 |
| ECP keypad | Panel bus power | ECP to VISTA |
| Z-Wave module | Mains or battery per device | Z-Wave to panel |
Source: 7847i / AlarmNet IP install guide (Resideo official documentation).