6150RFFRC Fixed Display Keypad w/WLESS Transceiver (Resideo)-French Error Codes & Status

Overview

Honeywell wired ECP keypad (6160, 6150, 6150RF, 6160RF, etc.) — alpha or fixed-display keypad on the panel data bus for arming, disarming, and zone status.

On Honeywell systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.

At a Glance

Specification	Details
Role	Wired ECP keypad
Bus	4-wire ECP to VISTA panel
6160RF variant	Adds 5800 wireless receiver in keypad
Power	Powered from panel data bus

What This Device Does Well

Provides reliable supervised status at the panel and Total Connect 2.0 when installed, enrolled, and range-tested correctly.

Before You Service or Replace One

Sensor SKU — 5800 Series one-way vs SiX two-way encrypted vs hardwired.
Panel online — resolve panel AC/cell trouble before blaming sensor.
Range — 5800RP repeater or move 5881EN/6160RF receiver path for distant zones.
Battery type — use listed cell; replace all batteries in multi-cell devices.
Tamper — cover fully closed before declaring hardware fault.

Official Sources

Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.

Error Codes

Honeywell systems report faults on the panel and keypad status screens, zone list, and Total Connect 2.0 (when interactive service is active) — not as a single universal numeric code list across all models.

How to read status

Open panel status or installer menu → zones / troubles.
Note zone number, trouble type (open, tamper, low battery, missing, cell fail).
Cross-check Total Connect 2.0 device list if the account is interactive.
For cell issues, run installer communication test before replacing sensors.

Common trouble indicators

Symptom	Meaning	First checks
Keypad offline	RF or power loss	AC adapter, battery backup, range to panel
Cannot arm from keypad	System not ready	Open zones on panel status screen
Wrong code	User number mismatch	Reprogram user in installer menu

Installer programming reference

Task	Typical path
Enter installer programming	Installer code on panel (dealer-provided)
Enroll wireless sensor	Wireless enrollment → Learn → trip sensor
Delete sensor	Zone delete / sensor delete in installer menu
Cell module test	Installer → communication / dialer tests
User code setup	User management in installer or user menu
Z-Wave exclude/include	Panel Z-Wave management menu

Panel actions (typical)

Action	Where
View zone status	Panel home / status → zones
Walk test	Installer menu → walk test
Delete / enroll sensor	Installer → wireless enrollment
Cell test	Installer → communication tests
Total Connect 2.0 status	Dealer portal or customer app

Source: Keypad install guide for VISTA ECP family; Resideo official resources linked in this product folder manifest.

Code	Meaning	Suggested Fix
Keypad offline	RF or power loss	AC adapter, battery backup, range to panel
Cannot arm from keypad	System not ready	Open zones on panel status screen
Wrong code	User number mismatch	Reprogram user in installer menu
Task	Typical path
Enter installer programming	Installer code on panel (dealer-provided)
Enroll wireless sensor	Wireless enrollment → Learn → trip sensor
Delete sensor	Zone delete / sensor delete in installer menu
Cell module test	Installer → communication / dialer tests
User code setup	User management in installer or user menu
Z-Wave exclude/include	Panel Z-Wave management menu
Action	Where
View zone status	Panel home / status → zones
Walk test	Installer menu → walk test
Delete / enroll sensor	Installer → wireless enrollment
Cell test	Installer → communication tests
Total Connect 2.0 status	Dealer portal or customer app