Overview
Honeywell wireless keyfob or panic — portable arm/disarm/panic device (5834-4, SiXFOB, related SKUs).
On Honeywell systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.
At a Glance
| Specification | Details |
|---|---|
| Functions | Arm/disarm and/or panic — SKU specific |
| Wireless | 5800 Series or SiX depending on model |
| Security | Delete lost fobs from panel user list |
What This Device Does Well
Provides reliable supervised status at the panel and Total Connect 2.0 when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- Sensor SKU — 5800 Series one-way vs SiX two-way encrypted vs hardwired.
- Panel online — resolve panel AC/cell trouble before blaming sensor.
- Range — 5800RP repeater or move 5881EN/6160RF receiver path for distant zones.
- Battery type — use listed cell; replace all batteries in multi-cell devices.
- Tamper — cover fully closed before declaring hardware fault.
Official Sources
- Resideo product page
- Installation and Setup Guide - 269R/270R Holdup Switch (English)
- Installation and Setup Guide - 269SN Holdup Switch (English)
- V-Plex Addressable Technology (English)
- V-Plex Family Scalable Solutions (English)
- V-Plex Addressable Technology (French)
Use official Resideo install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Compatible Peripherals
This page lists Honeywell Home ecosystem compatibility — panels, transceivers, repeaters, and monitoring platforms — not third-party panel brands unless using an approved takeover path.
Host compatibility
| Host / ecosystem | How it connects |
|---|---|
| 5800 or SiX compatible panel | Keyfob enrollment to user number |
Not compatible / common mistakes
Using Honeywell wireless devices without a compatible 5800 receiver or SiX/ProSeries/Lyric host panel.
Replacement guidance
- Match SKU and encryption generation on product label before ordering.
- Delete old zone/device in installer programming before enrolling replacement.
- Document zone number and name for user and central station records.
- Run walk test and communication test after swap on monitored accounts.
Source: Keyfob programming guide (Resideo official documentation).