DSC Wireless PowerG Smoke and Heat Detector Compatible panels & systems

DSC smoke or heat detector — life-safety point requiring correct zone type and often separate fire account.

Product type

Security sensor

At a glance

What this device does in the system

Reports intrusion, life-safety, or status conditions to the host panel — faults appear as zone or module troubles, not always on the device itself.

Before you install or replace one

• Confirm exact model number on the label matches the install manual.
• Verify host panel or system family — Keybus, Corbus, Combus, PowerG, MX, or 433 MHz are not interchangeable.
• Check device limits on the panel/receiver before adding zones, sirens, or credentials.
• Include current draw in power budget calculations for modules, receivers, and keypads.
• For wireless: test RF at the mounted location, not only on the bench.

Official sources

• Product page: DSC Wireless PowerG Smoke and Heat Detector (ID 2479)
• Smoke/heat detector installation manual — DSC official documentation

This page lists which panels and systems this product works with — not unrelated sensors or keypads.

Host compatibility

Not compatible / common mistakes

• Burglary-only programming on fire-listed smoke without AHJ approval

Replacement guidance

• Match model, frequency, and bus type to the removed device.
• Re-enroll wireless devices after replacement — ESN/serial changes with new hardware.
• Document zone/siren/device number for monitoring station handoff.

Source: Smoke/heat detector installation manual (DSC official documentation).