Overview
HS2LCDWF PowerG wireless full-message keypads provide two-way status and control without Corbus homerun wiring — enrolled to Neo PowerG ecosystem.
Panel bus / link type
PowerG wireless (Neo)
At a Glance
| Detail | Value |
|---|---|
| Product type | Alarm keypad / operator interface |
| Model family (HS2LCDWF, HS2LCDWFP, HS2LCDWFPV) | See label and install manual |
| Bus / wireless link | PowerG wireless (Neo) |
| Primary manual | HS2LCDWF Installation Manual; HS2LCDWF Installation Guide |
| Region / listing notes | PowerG frequency/certification varies by regional SKU |
Before You Install or Replace One
- Confirm exact model number on the keypad label matches the install manual.
- Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, and IMPASSA wireless are not interchangeable.
- Plan unique keypad address or wireless enrollment — duplicates cause bus collisions or offline devices.
- Check partition assignment (global vs partition keypad) for multi-partition sites.
- Include keypad current draw in panel AUX / Corbus / battery standby calculations.
Official Sources
- Product page: DSC Wireless Full Message LCD PowerG 2-Way Security Keypad with Prox Support (ID 2456)
- HS2LCDWF Installation Manual; HS2LCDWF Installation Guide — DSC official documentation
Installation Notes
Follow HS2LCDWF Installation Manual; HS2LCDWF Installation Guide for mounting, wiring, addressing, and enrollment. Summary below — not a substitute for the full manual.
Pre-install checklist
- Match keypad SKU to host panel family (see compatible-peripherals.md).
- Select mounting height and tamper-secure back box per local code.
- Reserve bus power or confirm wireless transceiver capacity on panel.
- Plan partition and global keypad roles for multi-partition installs.
Typical install sequence
- Mount keypad back box and pull bus or confirm wireless coverage at location.
- Wire Keybus/Corbus homerun or begin wireless enrollment per manual.
- Assign keypad address in panel programming (
[013]PowerSeries,[902]Neo/Pro, DLS for MAXSYS). - Set partition assignment and display options.
- Test arming, disarming, trouble display, and prox/RF features if equipped.
- Document address, partition, and installer access for service handoff.
Regional notes
PowerG frequency/certification varies by regional SKU
Source: HS2LCDWF Installation Manual; HS2LCDWF Installation Guide (DSC official documentation).