Overview
Rack mount kit for Sur-Gard receiver equipment in central-station racks.
Product type
Module / accessory
At a glance
| Detail | Value |
|---|---|
| Category | Module / accessory |
| Primary manual | Rack Mount Kit Installation Instructions |
| Install scope | Central station / infrastructure |
| Supervision | Central-station receiver |
What this device does in the system
Extends panel capacity (zones, outputs, wireless, power, or reporting) — plan bus address, current draw, and device limits before install.
Before you install or replace one
- Confirm exact model number on the label matches the install manual.
- Verify host panel or system family — Keybus, Corbus, Combus, PowerG, MX, or 433 MHz are not interchangeable.
- Check device limits on the panel/receiver before adding zones, sirens, or credentials.
- Include current draw in power budget calculations for modules, receivers, and keypads.
- For wireless: test RF at the mounted location, not only on the bench.
Official sources
- Product page: DSC Rack Mount Kit (ID 1419)
- Rack Mount Kit Installation Instructions — DSC official documentation
Compatible Peripherals
This product is central-station or infrastructure equipment — it does not mount on end-user intrusion panels like a zone expander.
Host compatibility
| Host system | How it connects |
|---|---|
| Sur-Gard SYSTEM III/IV receivers | 19-inch rack mounting hardware |
Not compatible / common mistakes
Cross-family substitution without manual verification.
Replacement guidance
- Match model, frequency, and bus type to the removed device.
- Re-enroll wireless devices after replacement — ESN/serial changes with new hardware.
- Document zone/siren/device number for monitoring station handoff.
Source: Rack Mount Kit Installation Instructions (DSC official documentation).