Overview
PowerSeries Pro is a commercial hybrid platform designed for larger multi-partition sites and EN-oriented deployments.
Official source
- Product page: DSC PowerSeries Pro (ID 2650)
Model capacity
| Model | Max zones |
|---|---|
| HS3032 | 32 |
| HS3128 | 128 |
| HS3248 | 248 |
Platform profile
- Corbus architecture for keypads and modules
- HS65WPSNA family external power adapter (18 VDC to panel)
- Expansion: HSM3408UL / HSM2108UL zone modules, HSM2208 outputs, HSM2300 power supply
- Standby draw ~85 mA base (higher with plug-in communicator modules — use Battery Calculation Chart)
- Programming model aligned with Neo:
[902]module enrollment,[804]wireless enrollment
Grade 2/3 EN50131 support note
Grade 2 operation follows standard site code policy.
Installation Notes
Recommended build order
- Mount panel and route Corbus branches.
- Install HS65WPSNA-family power adapter and verify input/output.
- Add keypads and confirm basic panel interaction.
- Add HSM3408UL/HSM2108UL expansion as required.
- Program and enroll modules.
- Run full signaling and walk test.
Corbus and power (Installation Manual v1.1)
| Output | HS3032 / HS3128 / HS3248 |
|---|---|
| Corbus / AUX | Shared budget — reserve 100 mA minimum for Corbus; subtract each keypad and module rating |
| HS65WPSNA | Primary 18 VDC power adapter (UL/ULC: HS65WPSNA cord-connected; commercial fire: HS65WPSNAS hardwired) |
| Wire | 18–22 AWG quad/two-pair twisted; do not use shielded Corbus wire |
| Expansion | HSM2108UL (8 zones), HSM3408UL (8 zones), HSM2208 outputs, HSM2300 power supply |
Grade 3 note (when applicable)
EN50131-1 Grade 3 sites require 8-digit user/access codes — 4-digit codes are insufficient on Grade 3 compliant systems.
Programming references
- [902] module enrollment and supervision flow
- [804] wireless enrollment where applicable
Compliance note
- Grade 2/3 EN50131 deployment requirements vary by project profile.
- Grade 2 operation follows standard site code policy.