AlarmSystemHelp.com

DSC PowerSeries Pro - LE9080 Cellular Communicator FAQs

LE9080 / 3G9080 cellular communicators report PowerSeries Pro (HS3032/3128/3248) systems over mobile networks as Corbus modules. Reporting path LTE/3G cellular (PowerSeries Pro Corbus) At a Glance DetailValue Product ...

Overview

LE9080 / 3G9080 cellular communicators report PowerSeries Pro (HS3032/3128/3248) systems over mobile networks as Corbus modules.

Reporting path

LTE/3G cellular (PowerSeries Pro Corbus)

At a Glance

DetailValue
Product typeAlarm communicator / reporting module
Model family (LE9080, 3G9080, GS9080)See label and install manual
Reporting pathLTE/3G cellular (PowerSeries Pro Corbus)
Primary manualLE9080/3G9080 Cellular Alarm Communicator Installation Instructions
Region / listing notesLT/LV/3G/GS9080 suffix = technology/region

Before You Install or Replace One

  • Confirm exact model number on the communicator label matches the install manual.
  • Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, IMPASSA integrated, or universal dialer-capture are not interchangeable.
  • Confirm monitoring receiver and account accept this communicator format (Contact ID, SIA, IP, cellular).
  • Check carrier/network generation (3G sunset, LTE band, Ethernet path) for your region.
  • Add communicator current draw to panel battery standby calculation where the module loads from panel bus power.

Official Sources

  • LE9080/3G9080 Cellular Alarm Communicator Installation Instructions — DSC official documentation

FAQs

Which panels does this communicator work with?

See compatible-peripherals.md for the host panel table. This communicator is not universal unless explicitly listed as panel-agnostic dialer capture (3G4010, LE4000, TL300 universal families).

Is this the same as a T-Link receiver?

No. Communicators send signals from the premises panel; Sur-Gard/T-Link receivers accept signals at the central station. Both must be compatible with your monitoring path.

Why does the panel show FTC after install?

Failure to Communicate means the panel could not complete a successful report — check wiring, account programming, receiver availability, and format (Contact ID/SIA) before replacing hardware.

Can I move this communicator to a different panel brand?

Only universal dialer-capture units (3G4010, LE4000, etc.) are designed for multi-brand use. Panel-bus modules (GS2060, TL280, TL880, TL250) are family-specific.

Where is the official documentation?

DSC PowerSeries Pro - LE9080 Cellular Communicator (ID 2659) — LE9080/3G9080 Cellular Alarm Communicator Installation Instructions

Which panels does this communicator work with?
See compatible-peripherals.md for the host panel table. This communicator is not universal unless explicitly listed as panel-agnostic dialer capture (3G4010, LE4000, TL300 universal families).
Is this the same as a T-Link receiver?
No. Communicators send signals from the premises panel; Sur-Gard/T-Link receivers accept signals at the central station. Both must be compatible with your monitoring path.
Why does the panel show FTC after install?
Failure to Communicate means the panel could not complete a successful report — check wiring, account programming, receiver availability, and format (Contact ID/SIA) before replacing hardware.
Can I move this communicator to a different panel brand?
Only universal dialer-capture units (3G4010, LE4000, etc.) are designed for multi-brand use. Panel-bus modules (GS2060, TL280, TL880, TL250) are family-specific.
Where is the official documentation?
DSC PowerSeries Pro - LE9080 Cellular Communicator (ID 2659) (https://www.dsc.com/index.php?n=products&o=view&id=2659) — LE9080/3G9080 Cellular Alarm Communicator Installation Instructions