Overview
PowerSeries Pro is a commercial hybrid platform designed for larger multi-partition sites and EN-oriented deployments.
Official source
- Product page: DSC PowerSeries Pro (ID 2671)
Model capacity
| Model | Max zones |
|---|---|
| HS3032 | 32 |
| HS3128 | 128 |
| HS3248 | 248 |
Platform profile
- Corbus architecture for keypads and modules
- HS65WPSNA family external power adapter (18 VDC to panel)
- Expansion: HSM3408UL / HSM2108UL zone modules, HSM2208 outputs, HSM2300 power supply
- Standby draw ~85 mA base (higher with plug-in communicator modules — use Battery Calculation Chart)
- Programming model aligned with Neo:
[902]module enrollment,[804]wireless enrollment
Grade 2/3 EN50131 support note
Grade 3 operation requires 8-digit user/access codes where applicable.
Troubleshooting
Core sequence
- Validate power adapter and panel power rails.
- Validate Corbus integrity before module replacement.
- Validate enrollment and partition mapping after each wiring correction.
Expansion troubleshooting
- Confirm HSM3408UL and HSM2108UL addressing and enrollment.
- Test each expanded input with open/restore cycles.
- Verify no duplicate zone definitions across panel and expansion hardware.
Programming checks
- Use [902] for module enrollment/supervision review workflows.
- Use [804] for wireless-related enrollment where configured.
EN deployment check
If the site is commissioned for Grade 3 operation, validate code-length policy and user-code setup before handoff.