Overview
This catalog entry is a PowerSeries Neo control panel, not a keypad. Operator interfaces are separate HS2LCD, ICON, or HS2TCH products.
Recommended keypads for this panel
Recommended operator keypads for Neo: HS2LCD (hardwired LCD), ICON-RF (icon + optional PowerG), HS2TCHP (7-inch touchscreen). Each requires separate Corbus enrollment at [902].
Panel bus / link type
N/A — control panel listing
At a Glance
| Detail | Value |
|---|---|
| Product type | Alarm keypad / operator interface |
| Model family | See label and install manual |
| Bus / wireless link | N/A — control panel listing |
| Primary manual | PowerSeries Neo Install Guide |
| Region / listing notes | Miscategorized under keypads in DSC CMS |
Before You Install or Replace One
- Confirm exact model number on the keypad label matches the install manual.
- Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, and IMPASSA wireless are not interchangeable.
- Plan unique keypad address or wireless enrollment — duplicates cause bus collisions or offline devices.
- Check partition assignment (global vs partition keypad) for multi-partition sites.
- Include keypad current draw in panel AUX / Corbus / battery standby calculations.
Official Sources
- Product page: DSC PowerSeries Neo Security Control Panel (ID 2444)
- PowerSeries Neo Install Guide — DSC official documentation
Error Codes
Not a keypad — Neo control panel
This catalog entry is a PowerSeries Neo control panel, not an operator keypad. Troubles on the integrated display (if any) follow panel service — arming/status keypads are separate HS2LCD, ICON, or HS2TCH products.
| If end user reports | Actual fix |
|---|---|
| "Keypad dead" | Identify installed HS2LCD/ICON/HS2TCH model — panel SKU alone is not the keypad |
| No display on Neo panel | Panel power/Corbus — not PK5500 Keybus wiring |
| Wrong product ordered | Order HS2LCD or HS2TCHP for Neo operator interface |
For installed operator keypads on this panel family, see the HS2LCD/ICON/HS2TCH or PK5500/LCD5511 product listing matching the device on site.
Source: PowerSeries Neo Install Guide (DSC official documentation).
| Code | Meaning | Suggested Fix |
|---|---|---|
| If end user reports | Actual fix | |
| "Keypad dead" | Identify installed HS2LCD/ICON/HS2TCH model — panel SKU alone is not the keypad | |
| No display on Neo panel | Panel power/Corbus — not PK5500 Keybus wiring | |
| Wrong product ordered | Order HS2LCD or HS2TCHP for Neo operator interface |