Overview
PGPx986/PGP9986/PGP8986 PowerG water/freeze tile — supervised flood and low-temperature detection.
Product type
Security sensor
At a glance
| Detail | Value |
|---|---|
| Category | Security sensor |
| Primary manual | PowerG Water Tile with Freeze Detection Installation Manual |
| Install scope | Premises panel or bus device |
| Supervision | Panel trouble display when faulted |
What this device does in the system
Reports intrusion, life-safety, or status conditions to the host panel — faults appear as zone or module troubles, not always on the device itself.
Before you install or replace one
- Confirm exact model number on the label matches the install manual.
- Verify host panel or system family — Keybus, Corbus, Combus, PowerG, MX, or 433 MHz are not interchangeable.
- Check device limits on the panel/receiver before adding zones, sirens, or credentials.
- Include current draw in power budget calculations for modules, receivers, and keypads.
- For wireless: test RF at the mounted location, not only on the bench.
Official sources
- Product page: DSC PowerG + Water Tile with Freeze Detection PGPx986 (PGP9986, PGP8986) (ID 2746)
- PowerG Water Tile with Freeze Detection Installation Manual — DSC official documentation
Compatible Peripherals
This page lists which panels and systems this product works with — not unrelated sensors or keypads.
Host compatibility
| Host system | How it connects |
|---|---|
| PowerSeries Neo with PowerG transceiver | PowerG flood/freeze zone |
| PowerSeries Pro with PowerG | Enroll on PowerG network |
Not compatible / common mistakes
Cross-family substitution without manual verification.
Replacement guidance
- Match model, frequency, and bus type to the removed device.
- Re-enroll wireless devices after replacement — ESN/serial changes with new hardware.
- Document zone/siren/device number for monitoring station handoff.
Source: PowerG Water Tile with Freeze Detection Installation Manual (DSC official documentation).