Overview
DSC PowerG transceiver module — adds PowerG wireless network to Neo/Pro/IQ Pro panels.
Product type
Module / accessory
At a glance
| Detail | Value |
|---|---|
| Category | Module / accessory |
| Primary manual | PowerG transceiver installation manual |
| Install scope | Premises panel or bus device |
| Supervision | Panel trouble display when faulted |
What this device does in the system
Extends panel capacity (zones, outputs, wireless, power, or reporting) — plan bus address, current draw, and device limits before install.
Before you install or replace one
- Confirm exact model number on the label matches the install manual.
- Verify host panel or system family — Keybus, Corbus, Combus, PowerG, MX, or 433 MHz are not interchangeable.
- Check device limits on the panel/receiver before adding zones, sirens, or credentials.
- Include current draw in power budget calculations for modules, receivers, and keypads.
- For wireless: test RF at the mounted location, not only on the bench.
Official sources
- Product page: DSC PowerG + Host Transceiver Module (PGPHOST9) (ID 2738)
- PowerG transceiver installation manual — DSC official documentation
Need more help with this model?
We have not published model-specific troubleshooting for the DSC PowerG + Host Transceiver Module (PGPHOST9) yet. The manufacturer's installation and user manuals are the most reliable source for wiring, programming, and trouble codes.