Overview
Dual-path Internet and HSPA communicator for PowerSeries panels — combines LAN and cellular reporting with configurable primary/backup roles.
Reporting path
Internet + HSPA dual-path
At a Glance
| Detail | Value |
|---|
| Product type | Alarm communicator / reporting module |
|---|
| Model family (TL2603G, 3G2060) | See label and install manual |
|---|
| Reporting path | Internet + HSPA dual-path |
|---|
| Primary manual | 3G2060-TL2603G Installation Manual; TL2603GR Spec Sheet |
|---|
| Region / listing notes | Confirm HSPA network availability in deployment region |
|---|
Before You Install or Replace One
- Confirm exact model number on the communicator label matches the install manual.
- Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, IMPASSA integrated, or universal dialer-capture are not interchangeable.
- Confirm monitoring receiver and account accept this communicator format (Contact ID, SIA, IP, cellular).
- Check carrier/network generation (3G sunset, LTE band, Ethernet path) for your region.
- Add communicator current draw to panel battery standby calculation where the module loads from panel bus power.
Official Sources
- 3G2060-TL2603G Installation Manual; TL2603GR Spec Sheet — DSC official documentation
Compatible Peripherals
This page lists which alarm panels and related equipment work with this communicator — not wireless sensors or keypads.
Host panels & systems
| Host system | How it connects |
|---|---|
| PowerSeries PC1616 / PC1832 / PC1864 | Keybus alt-comms enrollment |
Related accessories
- See official installation manual for supported combinations.
Not compatible
- Neo, Pro, MAXSYS, IMPASSA, universal communicators
Central station / receiver notes
Universal and T-Link products require a monitoring receiver that accepts the communicator's protocol and supervision. Confirm with your central station before install.
Source: 3G2060-TL2603G Installation Manual; TL2603GR Spec Sheet (DSC official documentation).