DSC HSM3664 64 Point Graphic Annunciators Compatible panels & systems

HSM3632/HSM3664 graphic annunciators display Neo zone/status graphics on PowerSeries Neo Corbus.

Product type

Module / accessory

At a glance

What this device does in the system

Extends panel capacity (zones, outputs, wireless, power, or reporting) — plan bus address, current draw, and device limits before install.

Before you install or replace one

• Confirm exact model number on the label matches the install manual.
• Verify host panel or system family — Keybus, Corbus, Combus, PowerG, MX, or 433 MHz are not interchangeable.
• Check device limits on the panel/receiver before adding zones, sirens, or credentials.
• Include current draw in power budget calculations for modules, receivers, and keypads.
• For wireless: test RF at the mounted location, not only on the bench.

Official sources

• Product page: DSC HSM3664 64 Point Graphic Annunciators (ID 2729)
• HSM3632/HSM3664 Graphic Annunciator Installation Manual — DSC official documentation

This page lists which panels and systems this product works with — not unrelated sensors or keypads.

Host compatibility

Not compatible / common mistakes

Cross-family substitution without manual verification.

Replacement guidance

• Match model, frequency, and bus type to the removed device.
• Re-enroll wireless devices after replacement — ESN/serial changes with new hardware.
• Document zone/siren/device number for monitoring station handoff.

Source: HSM3632/HSM3664 Graphic Annunciator Installation Manual (DSC official documentation).