DSC Communicator Remote Mounting Module Error Codes

PCL-422 is a remote mounting module for PowerSeries Neo Corbus communicators (TL880, TL280, 3G8080, etc.) when the communicator must be installed away from the panel for antenna placement.

Reporting path

Accessory — remote mount enclosure

At a Glance

Before You Install or Replace One

• Confirm exact model number on the communicator label matches the install manual.

• Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, IMPASSA integrated, or universal dialer-capture are not interchangeable.

• Confirm monitoring receiver and account accept this communicator format (Contact ID, SIA, IP, cellular).

• Check carrier/network generation (3G sunset, LTE band, Ethernet path) for your region.

• Add communicator current draw to panel battery standby calculation where the module loads from panel bus power.

Official Sources

• Product page: DSC Communicator Remote Mounting Module (ID 2488)

• PS Neo PCL-422 v1.0 Installation Sheet — DSC official documentation

PCL-422 (accessory — not a communicator)

This product is a remote mounting kit for Corbus communicators. It does not generate panel troubles by itself.

Panel FTC and alt-comms troubles apply to the host communicator, not this accessory — see the communicator listing for full trouble tables.

Source: PS Neo PCL-422 v1.0 Installation Sheet (DSC official documentation).