Overview
CFP-550 commercial fire panel (legacy DSC fire line) — distinct from intrusion PowerSeries/Neo.
Product type
Fire / life safety
At a glance
| Detail | Value |
|---|---|
| Category | Fire / life safety |
| Primary manual | CFP-550 Installation Manual TRI NA |
| Install scope | Premises panel or bus device |
| Supervision | Panel trouble display when faulted |
What this device does in the system
Extends panel capacity (zones, outputs, wireless, power, or reporting) — plan bus address, current draw, and device limits before install.
Before you install or replace one
- Confirm exact model number on the label matches the install manual.
- Verify host panel or system family — Keybus, Corbus, Combus, PowerG, MX, or 433 MHz are not interchangeable.
- Check device limits on the panel/receiver before adding zones, sirens, or credentials.
- Include current draw in power budget calculations for modules, receivers, and keypads.
- For wireless: test RF at the mounted location, not only on the bench.
Official sources
- Product page: DSC CFP-550 (ID 1147)
- CFP-550 Installation Manual TRI NA — DSC official documentation
Compatible Peripherals
This page lists which panels and systems this product works with — not unrelated sensors or keypads.
Host compatibility
| Host system | How it connects |
|---|---|
| CFP-550 fire system | Standalone commercial fire — not intrusion panel bus |
Not compatible / common mistakes
Cross-family substitution without manual verification.
Replacement guidance
- Match model, frequency, and bus type to the removed device.
- Re-enroll wireless devices after replacement — ESN/serial changes with new hardware.
- Document zone/siren/device number for monitoring station handoff.
Source: CFP-550 Installation Manual TRI NA (DSC official documentation).