DSC 2-Way Wireless TouchScreen Arming Station Installation Notes

WTK5504 wireless touchscreen arming station for IMPASSA provides graphical control over the same wireless link as WT5500 keypads.

Panel bus / link type

IMPASSA integrated wireless

At a Glance

Before You Install or Replace One

• Confirm exact model number on the keypad label matches the install manual.
• Verify host panel family — Keybus PowerSeries, Neo Corbus, MAXSYS Combus, and IMPASSA wireless are not interchangeable.
• Plan unique keypad address or wireless enrollment — duplicates cause bus collisions or offline devices.
• Check partition assignment (global vs partition keypad) for multi-partition sites.
• Include keypad current draw in panel AUX / Corbus / battery standby calculations.

Official Sources

• Product page: DSC 2-Way Wireless TouchScreen Arming Station (ID 1414)
• WTK5504 Install Manual; WTK5504 User Manual — DSC official documentation

Follow WTK5504 Install Manual; WTK5504 User Manual for mounting, wiring, addressing, and enrollment. Summary below — not a substitute for the full manual.

Pre-install checklist

• Match keypad SKU to host panel family (see compatible-peripherals.md).
• Select mounting height and tamper-secure back box per local code.
• Reserve bus power or confirm wireless transceiver capacity on panel.
• Plan partition and global keypad roles for multi-partition installs.

Typical install sequence

1. Mount keypad back box and pull bus or confirm wireless coverage at location.
2. Wire Keybus/Corbus homerun or begin wireless enrollment per manual.
3. Assign keypad address in panel programming ([013] PowerSeries, [902] Neo/Pro, DLS for MAXSYS).
4. Set partition assignment and display options.
5. Test arming, disarming, trouble display, and prox/RF features if equipped.
6. Document address, partition, and installer access for service handoff.

Regional notes

Counts toward IMPASSA wireless keypad/device limits

Source: WTK5504 Install Manual; WTK5504 User Manual (DSC official documentation).