Overview
DMP XT Series compact control panels for smaller installs — supports DMP wireless, keypads, and communicators with Dealer Admin programming.
The panel is the brain of the DMP intrusion system: it supervises wired and wireless zones, drives bell/siren outputs, manages automation on supported models, and reports to central station when a compatible communicator is installed. Installers program zones, user codes, and dialer options in Dealer Admin; end users arm/disarm from keypads or the Virtual Keypad app.
At a Glance
| Specification | Details |
|---|---|
| Role | Compact DMP intrusion panel |
| Wireless | 1100 Series devices (verify XT capacity) |
| Comms | XT/XR communicator modules per SKU |
What This Panel Does Well
Coordinates intrusion zones, automation, user codes, and central station reporting when cell and monitoring are configured.
Before You Service or Replace One
- Exact panel model — DMP vs DMP XR vs Reliance vs Entré — firmware and modules differ.
- Encryption — 1100 Series vs hardwired vs DMP XR wireless sensors in the field.
- Cell module SKU — DMP central station LTE vs DMP XR/Entré 4G (AU/NZ SKUs).
- Installer code — required for zone changes; document before service.
- central station / Dealer Admin dealer — account status, plan, and remote programming access.
Official Sources
Use official DMP install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Compatible Peripherals
This page lists DMP ecosystem compatibility — panels, transceivers, repeaters, and monitoring platforms — not third-party panel brands unless using an approved takeover path.
Host compatibility
| Host / ecosystem | How it connects |
|---|---|
| 1100 Series sensors | Wireless enrollment |
| DMP keypads | Keypad bus |
Not compatible / common mistakes
Using DMP devices without a compatible panel receiver, DGP, or wireless expander for your product family.
Replacement guidance
- Match SKU and encryption generation on product label before ordering.
- Delete old zone/device in installer programming before enrolling replacement.
- Document zone number and name for user and central station records.
- Run walk test and communication test after swap on monitored accounts.
Source: DMP XT Series installation guide (DMP official documentation).