Overview
DMP zone/output expander — adds hardwired inputs, relays, or wireless receiver capacity to DMP panels.
On DMP systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.
At a Glance
| Specification | Details |
|---|---|
| Role | Panel expansion module |
| Install | Addressing on panel bus |
What This Device Does Well
Provides reliable supervised status at the panel and central station / Dealer Admin when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- Sensor SKU — 1100 Series wireless vs hardwired loop vs 433 MHz expander path.
- Panel online — resolve panel AC/comms trouble before blaming sensor.
- Range — 433 MHz expander or move wireless receiver for distant zones.
- Battery type — use listed cell; replace all batteries in multi-cell devices.
- Tamper — cover fully closed before declaring hardware fault.
Official Sources
Use official DMP install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
FAQs
Why does my zone show trouble?
Most common: low battery, tamper open, out of range, or wrong sensor type for the panel receiver (1100 Series wireless vs hardwired loops).
How do I replace a sensor?
Delete old zone in installer programming, enroll replacement using Learn mode, and test walk test at final location.
Will central station / Dealer Admin show this device?
When the panel has active interactive service, enrolled zones appear in the central station / Dealer Admin app with status matching the panel.
Where is official documentation?
Primary reference: DMP expander installation guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix 1100 Series and DMP XR wired devices?
1100 Series wireless devices require a DMP XR/XT panel with wireless receiver enabled — they do not enroll on hardwired-only configurations without the listed receiver hardware.
Why does my zone show trouble?
Most common: low battery, tamper open, out of range, or wrong sensor type for the panel receiver (1100 Series wireless vs hardwired loops).
Why does my zone show trouble?
Most common: low battery, tamper open, out of range, or wrong sensor type for the panel receiver (1100 Series wireless vs hardwired loops).
How do I replace a sensor?
Delete old zone in installer programming, enroll replacement using Learn mode, and test walk test at final location.
How do I replace a sensor?
Delete old zone in installer programming, enroll replacement using Learn mode, and test walk test at final location.
Will central station / Dealer Admin show this device?
When the panel has active interactive service, enrolled zones appear in the central station / Dealer Admin app with status matching the panel.
Will central station / Dealer Admin show this device?
When the panel has active interactive service, enrolled zones appear in the central station / Dealer Admin app with status matching the panel.
Where is official documentation?
Primary reference: DMP expander installation guide
Where is official documentation?
Primary reference: DMP expander installation guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix 1100 Series and DMP XR wired devices?
1100 Series wireless devices require a DMP XR/XT panel with wireless receiver enabled — they do not enroll on hardwired-only configurations without the listed receiver hardware.
Can I mix 1100 Series and DMP XR wired devices?
1100 Series wireless devices require a DMP XR/XT panel with wireless receiver enabled — they do not enroll on hardwired-only configurations without the listed receiver hardware.