Overview
DMP fire/life-safety device — smoke, heat, or CO wireless/hardwire life-safety input for listed DMP fire configurations.
Life-safety devices have stricter placement and testing requirements than burglary sensors. Follow NFPA/local code, use professional monitoring where required, and never substitute takeover modules for fire or CO hardwire.
At a Glance
| Specification | Details |
|---|---|
| Life safety | Follow NFPA/local code and monitoring requirements |
| Wireless | 1100 Series or hardwire per SKU |
What This Device Does Well
Provides reliable supervised status at the panel and central station / Dealer Admin when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- Device age — smoke/CO sensors expire; replace per label date.
- Zone type — fire vs burglary programming differs; do not bypass without authority.
- FireFighter placement — acoustic path to standalone smoke alarms.
- Monitoring — central station fire test procedures for monitored accounts.
Official Sources
Use official DMP install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
FAQs
Why does my zone show trouble?
Most common: low battery, tamper open, out of range, or wrong sensor type for the panel receiver (1100 Series wireless vs hardwired loops).
How do I replace a sensor?
Delete old zone in installer programming, enroll replacement using Learn mode, and test walk test at final location.
Will central station / Dealer Admin show this device?
When the panel has active interactive service, enrolled zones appear in the central station / Dealer Admin app with status matching the panel.
Where is official documentation?
Primary reference: DMP fire device installation guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix 1100 Series and DMP XR wired devices?
1100 Series wireless devices require a DMP XR/XT panel with wireless receiver enabled — they do not enroll on hardwired-only configurations without the listed receiver hardware.
Why does my zone show trouble?
Most common: low battery, tamper open, out of range, or wrong sensor type for the panel receiver (1100 Series wireless vs hardwired loops).
Why does my zone show trouble?
Most common: low battery, tamper open, out of range, or wrong sensor type for the panel receiver (1100 Series wireless vs hardwired loops).
How do I replace a sensor?
Delete old zone in installer programming, enroll replacement using Learn mode, and test walk test at final location.
How do I replace a sensor?
Delete old zone in installer programming, enroll replacement using Learn mode, and test walk test at final location.
Will central station / Dealer Admin show this device?
When the panel has active interactive service, enrolled zones appear in the central station / Dealer Admin app with status matching the panel.
Will central station / Dealer Admin show this device?
When the panel has active interactive service, enrolled zones appear in the central station / Dealer Admin app with status matching the panel.
Where is official documentation?
Primary reference: DMP fire device installation guide
Where is official documentation?
Primary reference: DMP fire device installation guide
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
How do I test after installation?
Use panel walk test, zone status, and (if monitored) central station test per dealer procedure.
Can I mix 1100 Series and DMP XR wired devices?
1100 Series wireless devices require a DMP XR/XT panel with wireless receiver enabled — they do not enroll on hardwired-only configurations without the listed receiver hardware.
Can I mix 1100 Series and DMP XR wired devices?
1100 Series wireless devices require a DMP XR/XT panel with wireless receiver enabled — they do not enroll on hardwired-only configurations without the listed receiver hardware.