Overview
DMP keypad — arming station or status keypad on DMP panel keypad/LX bus.
On DMP systems, wireless devices are supervised zones on the panel — tamper, low battery, and missing signals appear as trouble conditions that may block arming depending on panel programming.
At a Glance
| Specification | Details |
|---|---|
| Role | Arming and status interface |
| Connection | Panel keypad bus |
What This Device Does Well
Provides reliable supervised status at the panel and central station / Dealer Admin when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- Sensor SKU — 1100 Series wireless vs hardwired loop vs 433 MHz expander path.
- Panel online — resolve panel AC/comms trouble before blaming sensor.
- Range — 433 MHz expander or move wireless receiver for distant zones.
- Battery type — use listed cell; replace all batteries in multi-cell devices.
- Tamper — cover fully closed before declaring hardware fault.
Official Sources
Use official DMP install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Error Codes
DMP systems report faults on the panel and keypad status screens, zone list, and central station / Dealer Admin (when interactive service is active) — not as a single universal numeric code list across all models.
How to read status
- Open panel status or installer menu → zones / troubles.
- Note zone number, trouble type (open, tamper, low battery, missing, cell fail).
- Cross-check central station / Dealer Admin device list if the account is interactive.
- For cell issues, run installer communication test before replacing sensors.
Common trouble indicators
| Symptom | Meaning | First checks |
|---|---|---|
| Keypad offline | RF or power loss | AC adapter, battery backup, range to panel |
| Cannot arm from keypad | System not ready | Open zones on panel status screen |
| Wrong code | User number mismatch | Reprogram user in installer menu |
Installer programming reference
| Task | Typical path |
|---|---|
| Enter installer programming | Installer code on panel (dealer-provided) |
| Enroll wireless sensor | Wireless enrollment → Learn → trip sensor |
| Delete sensor | Zone delete / sensor delete in installer menu |
| Cell module test | Installer → communication / dialer tests |
| User code setup | User management in installer or user menu |
| Z-Wave exclude/include | Panel Z-Wave management menu |
Panel actions (typical)
| Action | Where |
|---|---|
| View zone status | Panel home / status → zones |
| Walk test | Installer menu → walk test |
| Delete / enroll sensor | Installer → wireless enrollment |
| Cell test | Installer → communication tests |
| central station / Dealer Admin status | Dealer portal or customer app |
Source: DMP keypad installation guide; DMP official resources linked in this product folder manifest.
| Code | Meaning | Suggested Fix |
|---|---|---|
| Keypad offline | RF or power loss | AC adapter, battery backup, range to panel |
| Cannot arm from keypad | System not ready | Open zones on panel status screen |
| Wrong code | User number mismatch | Reprogram user in installer menu |
| Task | Typical path | |
| Enter installer programming | Installer code on panel (dealer-provided) | |
| Enroll wireless sensor | Wireless enrollment → Learn → trip sensor | |
| Delete sensor | Zone delete / sensor delete in installer menu | |
| Cell module test | Installer → communication / dialer tests | |
| User code setup | User management in installer or user menu | |
| Z-Wave exclude/include | Panel Z-Wave management menu | |
| Action | Where | |
| View zone status | Panel home / status → zones | |
| Walk test | Installer menu → walk test | |
| Delete / enroll sensor | Installer → wireless enrollment | |
| Cell test | Installer → communication tests | |
| central station / Dealer Admin status | Dealer portal or customer app |