Overview
DMP intrusion control panel — hybrid hardwire/wireless platform programmed through Dealer Admin with Virtual Keypad app and central-station reporting.
The panel is the brain of the DMP intrusion system: it supervises wired and wireless zones, drives bell/siren outputs, manages automation on supported models, and reports to central station when a compatible communicator is installed. Installers program zones, user codes, and dialer options in Dealer Admin; end users arm/disarm from keypads or the Virtual Keypad app.
At a Glance
| Specification | Details |
|---|---|
| Role | DMP control panel |
| Programming | Dealer Admin |
| Wireless | 1100 Series when equipped |
What This Panel Does Well
Coordinates intrusion zones, automation, user codes, and central station reporting when cell and monitoring are configured.
Before You Service or Replace One
- Exact panel model — DMP vs DMP XR vs Reliance vs Entré — firmware and modules differ.
- Encryption — 1100 Series vs hardwired vs DMP XR wireless sensors in the field.
- Cell module SKU — DMP central station LTE vs DMP XR/Entré 4G (AU/NZ SKUs).
- Installer code — required for zone changes; document before service.
- central station / Dealer Admin dealer — account status, plan, and remote programming access.
Official Sources
Use official DMP install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Installation Notes
Follow DMP panel installation and programming manual and the official resource links in this product folder for mounting, wiring, and enrollment.
Pre-install checklist
- Confirm panel model (XR/XT/X1) and 1100 Series vs hardwire zone type.
- Verify dealer cell account and module SKU before cell install.
- Document installer code and existing zone map for takeover jobs.
- Plan antenna routing (ANT5XL) when panel location has poor cell RSSI.
- Have listed batteries and tools for sensor mounts before enrollment.
Typical install sequence
- Mount and power panel; apply firmware updates per dealer bulletin.
- Install cell module and run communication test / central station / Dealer Admin activation.
- Enroll wireless sensors via installer Learn mode; label zones.
- Include Z-Wave devices after excluding from any prior hub.
- Install 433 MHz expander or optimize receiver placement before fringe wireless sensors.
- Run walk test, user code training, and central station test if monitored.
Power and connectivity reference
| Product type | Power | Network / RF |
|---|---|---|
| DMP XR/XT/X1 panel | AC + backup battery | Keypad bus; LTE/IP communicators; 1100 Series wireless |
| Wireless sensor | Battery per SKU | 1100 Series 1100 Series; 433 MHz on Reliance NXG-433 |
| Cell module | Panel-powered | LTE to dealer / central station / Dealer Admin |
| RAS keypad | Data bus | DMP XR/Entré host |
| Z-Wave module | Mains or battery per device | Z-Wave to panel |
Source: DMP panel installation and programming manual (DMP official documentation).