Overview
DMP fire/life-safety device — smoke, heat, or CO wireless/hardwire life-safety input for listed DMP fire configurations.
Life-safety devices have stricter placement and testing requirements than burglary sensors. Follow NFPA/local code, use professional monitoring where required, and never substitute takeover modules for fire or CO hardwire.
At a Glance
| Specification | Details |
|---|---|
| Life safety | Follow NFPA/local code and monitoring requirements |
| Wireless | 1100 Series or hardwire per SKU |
What This Device Does Well
Provides reliable supervised status at the panel and central station / Dealer Admin when installed, enrolled, and range-tested correctly.
Before You Service or Replace One
- Device age — smoke/CO sensors expire; replace per label date.
- Zone type — fire vs burglary programming differs; do not bypass without authority.
- FireFighter placement — acoustic path to standalone smoke alarms.
- Monitoring — central station fire test procedures for monitored accounts.
Official Sources
Use official DMP install PDFs and install guides for exact wiring, enrollment, and firmware — specifications vary by SKU and region.
Error Codes
DMP systems report faults on the panel and keypad status screens, zone list, and central station / Dealer Admin (when interactive service is active) — not as a single universal numeric code list across all models.
How to read status
- Open panel status or installer menu → zones / troubles.
- Note zone number, trouble type (open, tamper, low battery, missing, cell fail).
- Cross-check central station / Dealer Admin device list if the account is interactive.
- For cell issues, run installer communication test before replacing sensors.
Common trouble indicators
| Symptom | Meaning | First checks |
|---|---|---|
| Smoke/CO trouble | Device supervision fault | Battery, tamper, clean/replace per life |
| No alarm on test | Placement or sensitivity | Test per UL method; verify zone type |
| FireFighter no trip | Acoustic path blocked | Distance to existing smoke alarm; volume test |
| Cannot arm (fire) | Fire zone fault | Resolve trouble before arming — do not bypass life safety without policy |
Panel actions (typical)
| Action | Where |
|---|---|
| View zone status | Panel home / status → zones |
| Walk test | Installer menu → walk test |
| Delete / enroll sensor | Installer → wireless enrollment |
| Cell test | Installer → communication tests |
| central station / Dealer Admin status | Dealer portal or customer app |
Source: DMP fire device installation guide; DMP official resources linked in this product folder manifest.
| Code | Meaning | Suggested Fix |
|---|---|---|
| Smoke/CO trouble | Device supervision fault | Battery, tamper, clean/replace per life |
| No alarm on test | Placement or sensitivity | Test per UL method; verify zone type |
| FireFighter no trip | Acoustic path blocked | Distance to existing smoke alarm; volume test |
| Cannot arm (fire) | Fire zone fault | Resolve trouble before arming — do not bypass life safety without policy |
| Action | Where | |
| View zone status | Panel home / status → zones | |
| Walk test | Installer menu → walk test | |
| Delete / enroll sensor | Installer → wireless enrollment | |
| Cell test | Installer → communication tests | |
| central station / Dealer Admin status | Dealer portal or customer app |