Overview
Legacy Blink XT / XT2 / Indoor (Gen 1) camera — still supported in Blink app on compatible Sync Modules; verify generation before buying replacements.
Blink cameras and doorbells deliver motion alerts, Live View, and optional clip recording through the Blink app. Most models require a Sync Module 2 or XR on the same account. Clip storage may use cloud subscription, local hub storage, or both depending on settings.
At a Glance
| Specification | Details |
|---|---|
| Generation | Earlier Blink hardware — different mounts and batteries |
| Hub | Sync Module 2 or legacy Sync Module per compatibility chart |
| Replacement | Match XT vs XT2 vs Indoor SKU — not interchangeable housings |
What This Device Does Well
Delivers motion detection, alerts, and Live View when paired to a healthy Sync Module and Wi-Fi path.
Before You Service or Replace One
- Exact SKU on label — Outdoor 4 vs 2K+ vs legacy mount patterns differ.
- Sync Module online in app before blaming camera hardware.
- Battery type — lithium AA where specified; extension packs are model-specific.
- Subscription — cloud clip history requires active Blink plan where offered.
- Wi-Fi at mount — not just at router location.
Official Sources
- Blink Product Catalog
- Blink XT2 FAQ — Blink Support
- Mounting Your Blink XT2 Camera — Blink Support
- What's the Difference Between Blink XT and XT2 — Blink Support
- Blink XT and XT2 Camera Setup Guide — Blink Support
- XT2 and XT Technical Specifications — Blink Support
- Pink Image on Blink XT — Blink Support
- Mounting Your Blink XT — Blink Support
- XT2 - XT Camera Features — Blink Support
Use Blink support for firmware updates, battery SKUs, LED meanings, and regional feature availability.
Installation Notes
Follow Blink legacy camera support articles and official support links in this product folder.
Pre-install checklist
- Install Sync Module 2 or XR first for camera/doorbell products.
- Confirm 2.4 GHz Wi-Fi available with internet access.
- Charge or insert correct batteries before first sync.
- Plan clip storage — cloud plan, USB, or microSD on hub.
- For wired doorbell/floodlight: verify transformer/wiring meets Blink specs; turn off breaker.
Typical install sequence
- Plug in Sync Module; add to Blink app; confirm blue LED.
- Add camera/doorbell in app before final mount (Blink recommendation).
- Mount hardware per template; route cables cleanly on wired SKUs.
- Run Live View at final location; adjust aim and motion zones.
- Arm system; perform motion walk test; confirm notification/clip.
- Enable local storage or subscription as desired.
Power and connectivity reference
| Product type | Power | Network path |
|---|---|---|
| Sync Module 2 / XR | USB power adapter | 2.4 GHz Wi-Fi to router |
| Wire-free camera | Lithium AA batteries | Wi-Fi via Sync Module |
| Plug-in Mini | USB power | Wi-Fi via Sync Module |
| Wired floodlight / doorbell | Mains wiring | Wi-Fi via Sync Module |
| USB local storage | N/A (accessory) | Sync Module 2 USB port |
Source: Blink legacy camera support articles (Blink official documentation).