Overview
ADT security camera — indoor/outdoor video with ADT app integration (ADT cameras or bundled Google Nest cams on eligible plans).
ADT / Nest video devices integrate with the ADT+ or ADT Control app for Live View, motion notifications, and linked automations with alarm and other ADT devices. Video history and advanced features typically require ADT monitoring plan subscription.
At a Glance
| Specification | Details |
|---|---|
| Video | Live view and clips via ADT+ / ADT Control |
| Power | Battery, plug, or wired per model |
| Network | Wi-Fi — verify signal at mount location |
What This Device Does Well
Provides reliable status reporting and user-facing alerts through the ADT+ or ADT Control app when installed and enrolled correctly.
Before You Service or Replace One
- SKU and generation on box/label — setup flows differ (battery vs wired vs Pro).
- Wi-Fi band — 2.4 GHz requirement for most models.
- Transformer (wired doorbells) — voltage and power kit requirements.
- ADT monitoring plan — recording and advanced features vary by subscription.
- Shared device access — owner vs shared user troubleshooting permissions.
Official Sources
- ADT product page
- https://help.adt.com/article/ADT-Self-Setup-ADT-App-Introduction-and-Usage
- https://help.adt.com/article/ADT-Self-Setup-ADT-State-Licenses
- https://help.adt.com/article/ADT-Self-Setup-Account-Creation-FAQs
- https://help.adt.com/article/ADT-Self-Setup-Advanced-System-Settings
- https://help.adt.com/article/ADT-Self-Setup-Alarm-MessengerTM-and-Video-Verification
- https://help.adt.com/article/ADT-Self-Setup-Alarm-Registration-and-Permits
- https://help.adt.com/article/ADT-Self-Setup-Alert-Not-Received
- https://help.adt.com/article/ADT-Self-Setup-Alerts-and-Notifications
Use official ADT help.adt.com support articles for reset procedures, battery types, LED patterns, and regional availability — ADT updates app flows frequently.
Error Codes
ADT products report faults through the ADT+ or ADT Control app device status and device event history — not traditional numeric keypad codes like hardwired alarm panels.
How to read status
- Open ADT+ or ADT Control app → Menu → Alarm (or device tile for cameras).
- Tap device status or the device — note Offline, Tampered, Low Battery, Open.
- Tap the fault for ADT's suggested steps and linked help.adt.com articles.
- For hub issues, check Command panel / Self-Setup hub connectivity first — many "sensor offline" faults are mesh or hub internet issues.
Common status / trouble indicators
| App status / symptom | Meaning | First checks |
|---|---|---|
| Offline | Camera/doorbell lost Wi-Fi | Router, SSID, signal at device, power |
| Poor video quality | Bandwidth or Wi-Fi RSSI | Improve Wi-Fi at mount; check upload speed |
| Motion not recording | Settings or subscription | Motion zones, Nest Aware / ADT plan, mode schedule |
| Live View fails | Network or firmware | Reboot device; verify app permissions |
| Night vision issue | IR reflection or obstructions | Adjust angle; clean lens |
App actions (typical)
| Action | Where in ADT+ or ADT Control app |
|---|---|
| View device status | Alarm → hub or panel → device status |
| Remove and re-add device | Device settings → Remove → Set up new device |
| Arm/disarm test | Alarm modes on home screen |
| Contact support | Help → Contact ADT |
Source: ADT camera setup and Nest integration guides; ADT official support articles linked in this product folder manifest.
| Code | Meaning | Suggested Fix |
|---|---|---|
| Offline | Camera/doorbell lost Wi-Fi | Router, SSID, signal at device, power |
| Poor video quality | Bandwidth or Wi-Fi RSSI | Improve Wi-Fi at mount; check upload speed |
| Motion not recording | Settings or subscription | Motion zones, Nest Aware / ADT plan, mode schedule |
| Live View fails | Network or firmware | Reboot device; verify app permissions |
| Night vision issue | IR reflection or obstructions | Adjust angle; clean lens |
| Action | Where in ADT+ or ADT Control app | |
| View device status | Alarm → hub or panel → device status | |
| Remove and re-add device | Device settings → Remove → Set up new device | |
| Arm/disarm test | Alarm modes on home screen | |
| Contact support | Help → Contact ADT |